Case IH (CNH) Axial-Flow 2577
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Case IH (cnh) Axial-Flow 2577 is a Combines made by Case IH (cnh). From 8.3 litres the engine produces 197.6 kW.
Within the range, rated power spans from 198 to 373 kW; with 198 kW, the Axial-Flow 2577 sits at the bottom end. The next one up is the Axial-Flow 2588 with 227 kW.
Technical data
Engine
| Engine make | 2,408correct |
|---|---|
| Power | 197.6 kWcorrect |
| Displacement | 8,291.9 cm³correct |
Drivetrain and chassis
| Gearbox type | hydrostatic transmission drivecorrect |
|---|
Working data
| Fuel tank capacity | 681.4 lcorrect |
|---|
Frequently asked questions
How much power does the Case IH (CNH) Axial-Flow 2577 have?
The Case IH (CNH) Axial-Flow 2577 delivers 198 kW.
What engine does the Case IH (CNH) Axial-Flow 2577 have?
8,292 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Combine harvester in 3D section
Turn the model, look inside and click an assembly — each one is explained.