Case IH (CNH) 7088
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Case IH (cnh) 7088 is a Combines made by Case IH (cnh). From 148 cm³ the engine produces 242.4 kW.
Within the range, rated power spans from 198 to 373 kW; with 242 kW, the 7088 sits in the lower third. Directly alongside are the Axial-Flow 2588 with 227 kW below and the Axial-Flow 7010 with 261 kW above.
Technical data
Engine
| Engine make | 2,408correct |
|---|---|
| Engine model | Class VIIcorrect |
| Power | 242.4 kWcorrect |
| Displacement | 147.5 cm³correct |
Working data
| Fuel tank capacity | 946.4 lcorrect |
|---|
Frequently asked questions
How much power does the Case IH (CNH) 7088 have?
The Case IH (CNH) 7088 delivers 242 kW.
What engine does the Case IH (CNH) 7088 have?
148 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
2388
7120
7230
8120
8230
9230
Axial-Flow 2577
Axial-Flow 2588
Axial-Flow 7010
Axial-Flow 8010
case ih
Sources: [1]
Combine harvester in 3D section
Turn the model, look inside and click an assembly — each one is explained.