Start › Excavators & compaction › Case › CX75SR

Case CX75SR

Series: Case Midi Excavator

Source: https://www.technikboerse.com/gebraucht/bagger-789/case-ih-1

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case CX75SR belongs to the Case Midi Excavator series. The engine delivers 39.1 kW, has 4 cylinders, with a displacement of 3,059.5 cm³. Rated speed is 2,100 rpm. The unladen weight is 7,660 kg. Ground clearance is 362.7 mm. The tank holds 100.3 litres. The pump delivers 25.7 l/min. The hydraulic tank holds 95 litres. The cooling system holds 9.8 litres. The oil fill is 9.8 litres. The electrical system runs on 12 V. The engine fitted is the CC-4JG1. The Case Midi Excavator series covers 9 models. Rated output within it ranges from 27.2 to 41.2 kW; the CX75SR sits at the top of that range with 39.1 kW. Its immediate neighbours are the CX50B ZTS below it with 32.1 kW and the 9007B above it with 40.3 kW. 620 Case models across 22 series are on record. The model is listed under Excavators & compaction. 15 verified figures from 1 source are on file.

Technical data

Engine

Engine modelCC-4JG1correct
Power39.1 kWcorrect
Rated speed2,100 rpmcorrect
Cylinders4correct
Displacement3,059.5 cm³correct
AspirationNaturalcorrect
Coolant capacity9.8 lcorrect
Engine oil capacity9.8 lcorrect

Dimensions and weights

Ground clearance362.7correct
Unladen weight7,660 kgcorrect

Drivetrain and chassis

System voltage12 Vcorrect

Working data

Pump flow25.7 l/mincorrect
Hydraulic oil capacity95 lcorrect
Fuel tank capacity100.3 lcorrect

Other data

Height2,700.5correct

Where this model stands

Power-to-weight ratio: 5.1 kW/t (39 kW / 7.7 t)

Stronger than 8% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case CX75SR have?

The Case CX75SR delivers 39.1 kW.

How much does the Case CX75SR weigh?

The unladen weight is 7,660 kg.

What engine does the Case CX75SR have?

4 cylinders, 3,060 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

9007B

CX47

CX50B

CX50B ZTS

CX75

CX75C SR

CX80

CX80C

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare