StartExcavators & compactionCase › CX75C SR

Case CX75C SR

Series: Case Midi Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case Midi Excavator series from Case includes the CX75C SR. The engine delivers 41.2 kW. Rated speed is 2,000 rpm. The unladen weight is 7,350 kg. Ground clearance is 362.7 mm. The pump delivers 74.2 l/min. Working pressure is 294 bar. The electrical system runs on 24 V. The engine fitted is the Isuzu 4LE2X. The Case Midi Excavator series covers 9 models. Rated output within it ranges from 27.2 to 41.2 kW; the CX75C SR sits at the top of that range with 41.2 kW. Its immediate neighbours are the CX75 below it with 40.3 kW. 620 Case models across 22 series are on record. The model is listed under Excavators & compaction. 10 verified figures from 1 source are on file.

Technical data

Engine

Engine modelIsuzu 4LE2Xcorrect
Power41.2 kWcorrect
Rated speed2,000 rpmcorrect

Dimensions and weights

Length5,519.9correct
Ground clearance362.7correct
Unladen weight7,350 kgcorrect

Drivetrain and chassis

System voltage24 Vcorrect

Working data

Pump flow74.2 l/mincorrect
Hydraulic pressure294 barcorrect

Other data

Height2,773.7correct

Where this model stands

Power-to-weight ratio: 5.6 kW/t (41 kW / 7.3 t)

Stronger than 11% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case CX75C SR have?

The Case CX75C SR delivers 41.2 kW.

How much does the Case CX75C SR weigh?

The unladen weight is 7,350 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare