Start › Wheel loaders › Case › 921E

Case 921E

Series: Case Wheel Loader

Source: https://gebruikt.troostbv.com/troost/bouw/laders mascus.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 921E from Case is part of the Case Wheel Loader series. The engine delivers 277.8 hp (221.5 kW), has 6 cylinders, with a displacement of 10,815.5 cm³. Torque is 1,373.4 Nm. Rated speed is 1,800 rpm. The unladen weight is 22,961.8 kg. The wheelbase measures 3,404.6 mm. Ground clearance is 487.7 mm. The tank holds 393.7 litres. The gearbox has 4 forward gears. There are also 3 reverse gears. Maximum torque is reached at 900 rpm. The pump delivers 162 l/min. The hydraulic tank holds 242.3 litres. The cooling system holds 56.8 litres. The electrical system runs on 24 V. The engine fitted is the QSM 11. Tier III Certified. Tyre size: 26,5 x 25 L3 Bias. The Case Wheel Loader series covers 71 models. Rated output within it ranges from 55 to 359.9 hp; the 921E sits in the upper part of that range with 277.8 hp. Its immediate neighbours are the 921C below it with 273.7 hp and the 1021F above it with 294 hp. 620 Case models across 22 series are on record. The model is listed under Wheel loaders. 22 verified figures from 1 source are on file.

Technical data

Engine

Engine modelQSM 11, Tier III Certifiedcorrect
Power277.8 hp (221.5 kW)correct
Rated speed1,800 rpmcorrect
Torque1,373.4correct
Speed at max. torque900 rpmcorrect
Cylinders6correct
Displacement10,815.5 cm³correct
AspirationTurbocharged with Aftercoolercorrect
Coolant capacity56.8 lcorrect

Dimensions and weights

Wheelbase3,404.6correct
Ground clearance487.7correct
Unladen weight22,961.8 kgcorrect

Drivetrain and chassis

Gearbox type4F/3R Proportional w/Electronic Control Modulecorrect
Forward gears4correct
Reverse gears3correct
Tyre size26.5 x 25 L3 Biascorrect
System voltage24 Vcorrect

Working data

Pump flow162 l/mincorrect
Hydraulic oil capacity242.3 lcorrect
Fuel tank capacity393.7 lcorrect

Other data

Height3,694.2correct

Where this model stands

Power-to-weight ratio: 9.6 kW/t (222 kW / 23 t)

Stronger than 90% of the wheel loaders in the register — out of 1,253 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case 921E have?

The Case 921E delivers 278 hp.

How much does the Case 921E weigh?

The unladen weight is 22,962 kg.

What engine does the Case 921E have?

6 cylinders, 10,816 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

1021F

1021FXR

1021G

1121F

1121FXR

1121G

121E

121F

1221E

1221EXR

1221F

21D

Sources: [1]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare