StartForklift trucksBt › DT35

Bt DT35

Series: BT Forklift

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Bt DT35 is a model in the BT Forklift series. The engine with a displacement of 3,469.1 cm³. Rated speed is 2,200 rpm. The unladen weight is 4,940 kg. The wheelbase measures 1,700.8 mm. Ground clearance is 145 mm. Top speed is 19.6 km/h. The fuel is diesel. Maximum torque is reached at 1,600 rpm. The engine fitted is the 3Z. The BT Forklift series covers 26 models. Unladen weight within it ranges from 2,430 to 32,220 kg; the DT35 sits at the bottom of that range with 4,940 kg. Its immediate neighbours are the GT35 below it with 4,840 kg and the C4D400E above it with 6,250 kg. 188 Bt models across 14 series are on record. The model is listed under Forklift trucks. 11 verified figures from 1 source are on file.

Technical data

Engine

Engine model3Zcorrect
Fueldieselcorrect
Rated speed2,200 rpmcorrect
Speed at max. torque1,600 rpmcorrect
Displacement3,469.1 cm³correct

Dimensions and weights

Width1,292.4correct
Wheelbase1,700.8correct
Ground clearance145correct
Unladen weight4,940 kgcorrect

Drivetrain and chassis

Tyre typepneumatic front 250-15-16PR rear 6.50-10-12PRcorrect
Top speed19.6 km/hcorrect
Turning radius2,490 mmcorrect

Working data

Lifting capacity3,500 kgcorrect
Lift height4,000 mmcorrect
Mast typetriplexcorrect

Other data

Lift speed28.8 m/mincorrect
Load centre500.1 mmcorrect
Mast tilt back11°correct
Mast tilt forwardcorrect

Frequently asked questions

How much does the Bt DT35 weigh?

The unladen weight is 4,940 kg.

What engine does the Bt DT35 have?

3,469 cm³ displacement, diesel.

How fast does the Bt DT35 go?

Top speed is 19.6 km/h.

What is the load capacity of the Bt DT35?

Load capacity is 3,500 kg at a 500 mm load centre, lift height 4,000 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Forklift in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare