StartElectric motorsBrook Crompton › WM2-DF160LR-4

Brook Crompton WM2-DF160LR-4

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Brook Crompton lists the WM2-DF160LR-4 as a three-phase induction motor. The rated output is 15 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The housing is frame size 160 L in foot-mounted form. The efficiency is 90.9 per cent at full load, 91.8 per cent at 75 per cent load and 91.6 per cent at half load. The motor weighs 133 kg. At full load it delivers 98.1 Nm. Stated countries of manufacture: Poland and China. The values are recorded in the Australian MEPS registration under the GEMS Determination 2019; measured to IEC 60034-2-1 (Edition 2.0). Rated output across the Brook Crompton range ranges from 0.75 to 160 kW; the WM2-DF160LR-4 sits at the bottom of that range with 15 kW. Its immediate neighbours are the WM2-DF160MJ-4 below it with 11 kW and the A-EF180M above it with 18.5 kW. 161 Brook Crompton models are on record. The model is listed under Electric motors. 23 verified figures from 1 source are on file.

Technical data

Engine

Rated output15 kWcorrect

Dimensions and weights

Weight133 kgcorrect

Electrical data

Number of poles4correct
Protection classIP54, IP55, IP56, IP57, IP58, IP65, IP66correct
Frame size160 L (foot)correct
Mounting (IEC 60034-7)B3, B5, B6, B7, B8, B9, B10, B14, B15, B20, B25, B34, B35, V1, V2, V3, V4, V5, V6, V8, V9, V10, V14, V15, V16, V18, V19, V30, V31, V36correct
Efficiency at full load90.86 %correct
Efficiency at 75 % load91.84 %correct
Efficiency at half load91.57 %correct

Origin and approval

Country of manufacturePoland, Chinacorrect
Standard appliedGreenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2019correct
Test methodIEC 60034-2-1 (Edition 2.0)correct

Frequently asked questions

How much power does the Brook Crompton WM2-DF160LR-4 have?

The Brook Crompton WM2-DF160LR-4 delivers 15 kW.

What to check before buying

  • Match the data plate against the order: frame size, mounting and rating have to agree.
  • Check the ingress rating against the installation site — outdoors or in dust the demands differ.
  • Hold the mounting form and dimensions against the existing seat before ordering.
  • The pole count sets the speed — when replacing an older unit, compare this first.
  • For used units, ask about winding condition and bearing play.
  • Ask about parts availability for this series — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Electric motor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare