Branson 6530R 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a tractor, the Branson 6530R belongs to the Branson 4WD Tractor series. 66 hp (42.5 kW) is what the four-cylinder engine gets out of 3.3 litres. With a rated speed of 2,600 rpm, it is built for pulling power, not for revving.
Within the range, rated power spans from 29.4 to 65.9 hp; with 65.9 hp, the 6530R sits at the top. Below it ranks the 5530R with 55.8 hp.
Technical data
Engine
| Engine model | B3.3 NAcorrect |
|---|---|
| Power | 65.9 hp (42.5 kW)correct |
| Rated speed | 2,600 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 3,261 cm³correct |
Drivetrain and chassis
| Gearbox type | synchromesh gearboxcorrect |
|---|---|
| Forward gears | 24correct |
| Reverse gears | 24correct |
| Tyre size | front: 11.2-20, rear: 14.9-30correct |
| System voltage | 12 Vcorrect |
Working data
| Fuel tank capacity | 90.8 lcorrect |
|---|
Other data
| Height | 1,880.6correct |
|---|
Frequently asked questions
How much power does the Branson 6530R have?
The Branson 6530R delivers 65.9 hp.
What engine does the Branson 6530R have?
4 cylinders, 3,261 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.