Branson 6530 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Branson 6530 is a tractor from the Branson 4WD Tractor series. Power comes from a four-cylinder engine; from 3.3 litres it draws 66 hp (42.5 kW). Rated output is reached at 2,600 rpm, so it works in the lower rev range.
Within the range, rated power spans from 29.4 to 65.9 hp; with 65.9 hp, the 6530 sits at the top. Below it ranks the 5530R with 55.8 hp.
Technical data
Engine
| Engine model | B3.3 NAcorrect |
|---|---|
| Power | 65.9 hp (42.5 kW)correct |
| Rated speed | 2,600 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 3,261 cm³correct |
Drivetrain and chassis
| Gearbox type | synchromesh gearboxcorrect |
|---|---|
| Forward gears | 24correct |
| Reverse gears | 24correct |
| Tyre size | front: 11.2-20, rear: 14.9-30correct |
| System voltage | 12 Vcorrect |
Working data
| Fuel tank capacity | 90.8 lcorrect |
|---|
Other data
| Height | 2,542correct |
|---|
Frequently asked questions
How much power does the Branson 6530 have?
The Branson 6530 delivers 65.9 hp.
What engine does the Branson 6530 have?
4 cylinders, 3,261 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.