Böckmann CH 5121/35
Built: 2010-2013 · Series: CH
More machines from model year 2010
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Böckmann – CH: the collective page of trailers in this range from the Lastrup maker, CH 2516/20 to CH 6224/35, 0.69 to 1.17 t unladen weight, 3.5 t gross weight, 5.65 to 7.93 m length
This page gathers the CH-range trailers from Böckmann the register could not assign to a further named sub-variant. Böckmann is a vehicle maker from Lastrup in Lower Saxony that builds trailers for car-and-trailer combinations. Type numbers such as CH 2516/20 or CH 6224/35 usually give the floor length, side-wall height or similar build dimensions in centimetres, combined with the gross weight in steps of a hundred kilograms.
Read on 3 more paragraphs
The register lists here 5 versions with unladen weights from 685 to 1,174 kg, a gross weight of 3,500 kg throughout, lengths from 5,650 to 7,925 mm and widths from 2,165 to 2,515 mm.
With a uniform gross weight of 3.5 tonnes and lengths of up to nearly 8 metres, the CH range covers the upper end of class O2, as needed for larger loads in car-trailer use, for instance machinery, vehicles or bulky goods.
On a used trailer, the overrun brake and its adjustment matter, along with the condition of the axle bearings and brake linings, the frame and load floor for rust and distortion along their full length, the side panels for distortion and closure, and the lighting harness and tyres for even wear. On horse trailers from this range, checking the partitions, floor covering and ventilation is also worthwhile, since moisture and animal contact place greater strain on the interior than in plain transport trailers.
Sources: Kennwerte der Modelle Böckmann CH, Böckmann Fahrzeugwerke (Hersteller)
Technical data
Dimensions and weights
| Length | 6,660 mmcorrect |
|---|---|
| Width | 2,165 mmcorrect |
| Unladen weight | 878 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Frequently asked questions
How much does the Böckmann CH 5121/35 weigh?
The unladen weight is 878 kg.
What is the gross vehicle weight of the Böckmann CH 5121/35?
3,500 kg.
What are the dimensions of the Böckmann CH 5121/35?
6,660 mm × 2,165 mm.
When was the Böckmann CH 5121/35 built?
Production years: 2010-2013.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.