Bmk työntövene
Built: 1990 · Series: Other models
More machines from model year 1990
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Bmk Työntövene: the only trailer of this brand outside the named ranges, model year 1990, 5,300 kg gross weight, 5,050 kg unladen weight
This page carries the only trailer model of Bmk that the register did not assign to a named range: the model Työntövene from 1990, registered in Finland.
Read on 3 more paragraphs
The trailer has a gross weight of 5,300 kg against an unladen weight of 5,050 kg. At a length of 8,600 mm and a width of 3,100 mm, it clearly exceeds the standard road width of 2.55 m common in Europe, pointing to a vehicle for special transport that needs its own road permit.
With a gross weight of 5,300 kg, the trailer falls into EU category O3, above which an air brake system is typical, though with such a small margin between unladen and gross weight, the actual axle load in practice depends on the load carried. The combination of great width, considerable length and an unladen weight that uses up almost the entire gross weight points to a chassis built for one particular, bulky cargo rather than for varying loads.
On such a wide special trailer, what counts is the condition of the frame and axles under the unusual width load, the function of the air brake system, rust on load-bearing parts, and the completeness of the markings and lighting required for exceeding the standard width. On a vehicle from 1990, it is also worth checking its current eligibility for registration under today's rules for special transport, as well as the condition of the load-securing fittings on such a wide chassis.
Sources: SpecCodex-Register: Kennwerte des Modells Työntövene
Technical data
Dimensions and weights
| Length | 8,600 mmcorrect |
|---|---|
| Width | 3,100 mmcorrect |
| Unladen weight | 5,050 kgcorrect |
| Gross vehicle weight | 5,300 kgcorrect |
Frequently asked questions
How much does the Bmk työntövene weigh?
The unladen weight is 5,050 kg.
What is the gross vehicle weight of the Bmk työntövene?
5,300 kg.
What are the dimensions of the Bmk työntövene?
8,600 mm × 3,100 mm.
When was the Bmk työntövene built?
Production years: 1990.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.