Bendler Tensfeld HP 49
Built: 2008 · Series: Other models
More machines from model year 2008
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Bendler Tensfeld HP 49 - class O4 trailer with a gross weight of 34,000 kg, an unladen weight of 7,250 kg, a payload of 26,750 kg, and a width of 2,550 mm, built 2008
The register lists exactly one model for Bendler Tensfeld, the HP 49, from 2008. With a gross weight of 34,000 kg it lies well above 10 tonnes and falls into class O4, the heaviest category of the EU trailer classification, used in heavy-haulage and construction-site transport behind articulated tractors or heavy trucks.
Read on 3 more paragraphs
At a width of 2,550 mm, the HP 49 has an unladen weight of 7,250 kg; against the gross weight of 34,000 kg that leaves a payload of 26,750 kg. It is rated for 100 km/h. For a single model of this size, the ratio of unladen weight to payload shows how much the design is built around the load rather than its own structure.
In class O4, a compressed-air brake system across several axles is standard, and towing requires a category CE licence. How much the trailer can actually carry depends not only on gross weight but also on nose weight and coupling type, which determine the right towing vehicle.
When buying used, check the condition of axles and wheel bearings, the function of the braking system, corrosion on the frame and drawbar, and the state of lighting, the electrical connector, tyres and rims. Equally important are the load-securing anchor points and even wear of the brake linings across all axles. Exactly one example of this type is registered in the Netherlands, so spare parts are hard to find through normal trade.
Sources: SpecCodex-Register: Kennwerte des Modells Bendler Tensfeld HP 49
Technical data
Dimensions and weights
| Width | 2,550 mmcorrect |
|---|---|
| Unladen weight | 7,250 kgcorrect |
| Gross vehicle weight | 34,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Bendler Tensfeld HP 49 weigh?
The unladen weight is 7,250 kg.
What is the gross vehicle weight of the Bendler Tensfeld HP 49?
34,000 kg.
Up to what speed is the Bendler Tensfeld HP 49 approved?
Approved up to 100 km/h.
When was the Bendler Tensfeld HP 49 built?
Production years: 2008.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
