Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Scania Vabis › Other models › L-6646/4600

Scania Vabis L-6646/4600

Built: 1964 · Series: Other models

More machines from model year 1964

Source: scania.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The L-6646/4600 comes from Scania Vabis. Production: 1964. The engine delivers 103 kW, with a displacement of 7,800 cm³. The vehicle is 7,690 mm long and 2,400 mm wide. The unladen weight is 7,540 kg. Rated output across the Scania Vabis range ranges from 66 to 210 kW; the L-6646/4600 sits in the lower part of that range with 103 kW. Its immediate neighbours are the SCANIA VABIS L63 HS 1953 below it with 99 kW and the L 66 above it with 104 kW. Unladen weight across the Scania Vabis range ranges from 4,300 to 13,340 kg; here the L-6646/4600 sits in the lower part of that range with 7,540 kg. 125 Scania Vabis models across 2 series are on record.

Scania-Vabis – other models: the collective page of trucks under the double name from 1911 to 1969, from pre-war types with L for Lastbil to the L51, L65 and L76, 66 to 210 kW

This page gathers the Scania-Vabis trucks the register could not assign to a named range. Scania-Vabis was the brand name under which the Swedish maker from Södertälje traded from 1911 to 1969, after the Maskinfabriksaktiebolaget Scania, founded in Malmö in 1900, merged with the older Vabis carriage works; in 1969 the double name gave way to Scania alone. The types gathered here range from pre-war models with the letter L for Lastbil through the 1950s ranges such as the L51, L65, L71, L75 and L76 to the last Scania-Vabis model years around 1969; the attached numbers usually denoted engine power and range, though a consistent scheme can no longer be reliably reconstructed from the model names in the register alone.

Read on 3 more paragraphs

The register lists here 117 versions with 66 to 210 kW from four- to eight-cylinders of 5,191 to 15,607 cm³, unladen weights from 3,890 to 15,830 kg, gross weights from 5,020 to 30,210 kg, lengths from 5,100 to 12,000 mm and widths from 2,200 to 2,600 mm.

With its diesel engines and rugged chassis construction, Scania-Vabis shaped the Swedish truck industry and laid the foundation for today's Scania AB, which alongside Volvo ranks among Europe's leading commercial-vehicle makers; vehicles of this era are today seen chiefly as restored classics and at commercial-vehicle gatherings in Scandinavia.

On these historic chassis, what counts is chiefly the rust condition of frame and cab, engine and gearbox condition, the availability of parts through Scania-Vabis clubs and classic-vehicle specialists, and a well-documented vehicle history; a workshop experienced with early commercial vehicles is essential for restoration.

Sources: SpecCodex register, model data: Scania Vabis (weitere Modelle), Scania AB (Hersteller, Nachfolgemarke)

Technical data

Engine

Power103 kWcorrect
Displacement7,800 cm³correct

Dimensions and weights

Length7,690 mmcorrect
Width2,400 mmcorrect
Unladen weight7,540 kgcorrect

Where this model stands

Power-to-weight ratio: 13.7 kW/t (103 kW / 7.5 t)

Stronger than 7% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Scania Vabis L-6646/4600 have?

The Scania Vabis L-6646/4600 delivers 103 kW.

How much does the Scania Vabis L-6646/4600 weigh?

The unladen weight is 7,540 kg.

What engine does the Scania Vabis L-6646/4600 have?

7,800 cm³ displacement.

What are the dimensions of the Scania Vabis L-6646/4600?

7,690 mm × 2,400 mm.

When was the Scania Vabis L-6646/4600 built?

Production years: 1964.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare