Rovaniemen Kon 5015AIJ
Built: 1982 · Series: Other models
More machines from model year 1982
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Rovaniemen Kone RKP-3-90-TP – heavy EU class O4 trailer with a 33,000 kg gross weight, an 11.7 m length and a 3.0 m width above the road standard
With a gross weight of 33,000 kg the RKP-3-90-TP falls into EU trailer class O4, the heavy trailers above 10 tonnes. Trailers in this class always run air brakes and are pulled by heavy articulated tractor units or road trains in commercial heavy-goods haulage.
Read on 3 more paragraphs
The body is 11.7 m long and an unusually wide 3.0 m for road use, where 2.55 m is the norm. Unladen weight is 8,800 kg, leaving a payload of 24,200 kg. The combination of great width and high payload points to a trailer built for heavy, bulky goods such as those found in construction or industrial haulage.
A vehicle exceeding the standard 2.55 m width needs a special oversize-transport permit within the EU, often with an escort vehicle and route check. Class O4 requires an air-brake system with its own supply line from the towing vehicle plus an effective parking brake. The tractor unit and trailer must be joined by a coupling or fifth wheel rated for the axle load involved.
On a trailer of this size it is worth checking the chassis for distortion and corrosion on the heavily loaded main rails, the brake system including lines and actuators on every axle, and the suspension and steering pins for play. The body should be checked for distortion and the condition of the side panels, the tyres for even wear. A current roadworthiness certificate and the oversize-transport permit are also worth checking.
Sources: SpecCodex-Register: Kennwerte des Modells RKP-3-90-TP
Technical data
Dimensions and weights
| Length | 18,260 mmcorrect |
|---|---|
| Width | 3,500 mmcorrect |
| Unladen weight | 12,350 kgcorrect |
Frequently asked questions
How much does the Rovaniemen Kon 5015AIJ weigh?
The unladen weight is 12,350 kg.
What are the dimensions of the Rovaniemen Kon 5015AIJ?
18,260 mm × 3,500 mm.
When was the Rovaniemen Kon 5015AIJ built?
Production years: 1982.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 4 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
