Öggestorp Comfort 520
Built: 1989 · Series: Other models
More machines from model year 1989
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Dimensions and weights
| Length | 6,650 mmcorrect |
|---|---|
| Width | 2,300 mmcorrect |
| Unladen weight | 960 kgcorrect |
| Gross vehicle weight | 1,190 kgcorrect |
Frequently asked questions
How much does the Öggestorp Comfort 520 weigh?
The unladen weight is 960 kg.
What is the gross vehicle weight of the Öggestorp Comfort 520?
1,190 kg.
What are the dimensions of the Öggestorp Comfort 520?
6,650 mm × 2,300 mm.
When was the Öggestorp Comfort 520 built?
Production years: 1989.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
