Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Massey Harris › Other models › TE-A-20

Massey Harris TE-A-20

Built: 1952 · Series: Other models

More machines from model year 1952

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Massey Harris TE-A-20 is a model in the Pozostałe modele series. Production: 1952. The engine delivers 23 kW, has 4 cylinders, with a displacement of 1,879 cm³. The machine is 2,920 mm long and 1,550 mm wide. The unladen weight is 1,150 kg. The gearbox offers 4 gears. Rated output across the Massey Harris range ranges from 7.4 to 43 kW; the TE-A-20 sits in the middle of that range with 23 kW. Its immediate neighbours are the Modell-B below it with 22.4 kW and the 101 (SUPER) above it with 23.5 kW. Unladen weight across the Massey Harris range ranges from 857 to 7,983 kg; here the TE-A-20 sits at the bottom of that range with 1,150 kg. 66 Massey Harris models across 8 series are on record.

Massey Harris – other models: collective page of tractors outside the named ranges, from the Big Bull to the Pony and Pacer, 8.2 to 34 kW, kerosene, petrol and diesel engines

This page gathers the Massey Harris tractors the register could not assign to a named range – from early large tractors such as the Big Bull to the compact post-war Pony and Pacer models. Massey Harris was formed in 1891 from the merger of the Canadian farm-equipment makers Massey and Harris in Toronto, before the company merged in 1953 with Harry Ferguson's tractor firm to form Massey-Ferguson. TWIN POWER-CHALLENGER and TWIN POWER-PACEMAKER refer to the engageable two-speed PTO reduction. The entry TE-A-20 belongs to the licence-built Ferguson TE-20, briefly sold under the Massey name too in the transitional years after the merger.

Read on 3 more paragraphs

The register lists here 29 versions with 8.2 to 34 kW from two- to six-cylinder engines of 1,021 to 11,403 cm³, unladen weights of 857 to 5,352 kg, lengths of 2,520 to 4,394 mm, widths of 1,422 to 2,075 mm and heights of 1,346 to 2,080 mm; rated speeds range from 750 to 1,800 rpm. Engines came from Massey Harris itself, from Continental and Perkins, and from Chrysler; many early models were started on petrol and switched to cheaper kerosene once warm.

Between the world wars and through the 1940s Massey Harris was among the leading tractor makers of North America and Britain; the sturdy Pony and Pacer tractors served as affordable entry models and were exported to Europe too. The merger into Massey-Ferguson in 1953 ended independent model development.

When buying used, the condition of the cooling system and head gasket, rust on the mudguards and toolbox, and the function of the mechanical PTO and belt pulley matter most. Parts for Massey Harris engines often overlap with early Massey-Ferguson and Ferguson stock; wiring and the carburettor are the most common weak points on the older petrol and kerosene models.

Sources: SpecCodex register, model data: Massey Harris (weitere Modelle)

Technical data

Engine

Power23 kWcorrect
Cylinders4correct
Displacement1,879 cm³correct

Dimensions and weights

Length2,920 mmcorrect
Width1,550 mmcorrect
Unladen weight1,150 kgcorrect

Drivetrain and chassis

Gears4correct

Where this model stands

Power-to-weight ratio: 20 kW/t (23 kW / 1.1 t)

Power class: Compact (< 40 hp)

Stronger than 18% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Massey Harris TE-A-20 have?

The Massey Harris TE-A-20 delivers 23 kW.

How much does the Massey Harris TE-A-20 weigh?

The unladen weight is 1,150 kg.

What engine does the Massey Harris TE-A-20 have?

4 cylinders, 1,879 cm³ displacement.

What are the dimensions of the Massey Harris TE-A-20?

2,920 mm × 1,550 mm.

When was the Massey Harris TE-A-20 built?

Production years: 1952.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare