Massey Ferguson 168/2220
Built: 1972 · Series: Other models
More machines from model year 1972
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Massey Ferguson – other models: collective page of tractors outside the named ranges, from the 100 series to the 8000 series, 22 to 216 kW, Perkins and other diesel engines
This page gathers the Massey Ferguson tractors the register could not assign to a named range, from compact four-cylinder models to large four-wheel-drive tractors of the 8000 class. Massey Ferguson was formed in 1953 from the merger of Massey-Harris with Harry Ferguson's tractor firm and has belonged to AGCO since 1994. The type logic changed several times: three-digit types order size in ascending order, four-digit ranges such as the 4245 or 6480 give the range in the thousands digit and the model in the remaining digits, and the 4X4 suffix marks four-wheel drive. The entry TE-A-20 belongs to the licence-built Ferguson TE-20 from the transitional years after the merger.
Read on 3 more paragraphs
The register lists here 40 versions with 22 to 216 kW from three- to eight-cylinder engines of 1,750 to 10,500 cm³, unladen weights of 1,100 to 9,200 kg, gross weights up to 13,180 kg, lengths of 2,769 to 5,200 mm, widths of 1,500 to 2,720 mm and heights up to 3,200 mm; torque ranges from 176.8 to 593 Nm at rated speeds of 1,600 to 2,250 rpm.
By unit numbers Massey Ferguson is one of the world's best-selling tractor brands, with strongholds in Britain, France and Scandinavia; the models listed here span the full range from yard tractor to large field tractor.
When buying used, on the smaller model years the radiator, head gasket and hydraulic pump matter, on the large 4x4 models the transfer case, front axle and electronics; rust on mudguards and steps is common on older models. Parts run through AGCO and Perkins as well as a broad independent market.
Sources: Kennwerte der Modelle Massey Ferguson (weitere Modelle), Massey Ferguson (AGCO, Hersteller)
Technical data
Engine
| Displacement | 3,860 cm³correct |
|---|
Dimensions and weights
| Width | 1,830 mmcorrect |
|---|---|
| Unladen weight | 2,800 kgcorrect |
Frequently asked questions
How much does the Massey Ferguson 168/2220 weigh?
The unladen weight is 2,800 kg.
What engine does the Massey Ferguson 168/2220 have?
3,860 cm³ displacement.
When was the Massey Ferguson 168/2220 built?
Production years: 1972.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 4 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.