Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Massey Ferguson › Other models › 130/1830-65

Massey Ferguson 130/1830-65

Built: 1965 · Series: Other models

More machines from model year 1965

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Pozostałe modele series from Massey Ferguson includes the 130/1830-65. Production: 1965. The engine delivers 22 kW, has 4 cylinders, with a displacement of 1,750 cm³. The machine is 2,810 mm long and 1,500 mm wide. The unladen weight is 1,350 kg. Rated output across the Massey Ferguson range ranges from 5.2 to 340 kW; the 130/1830-65 sits at the bottom of that range with 22 kW. Its immediate neighbours are the 1529 below it with 21.2 kW and the MF 132 (A) above it with 22.1 kW. Unladen weight across the Massey Ferguson range ranges from 670 to 12,150 kg; here the 130/1830-65 sits at the bottom of that range with 1,350 kg. 1668 Massey Ferguson models across 56 series are on record.

Massey Ferguson – other models: collective page of tractors outside the named ranges, from the 100 series to the 8000 series, 22 to 216 kW, Perkins and other diesel engines

This page gathers the Massey Ferguson tractors the register could not assign to a named range, from compact four-cylinder models to large four-wheel-drive tractors of the 8000 class. Massey Ferguson was formed in 1953 from the merger of Massey-Harris with Harry Ferguson's tractor firm and has belonged to AGCO since 1994. The type logic changed several times: three-digit types order size in ascending order, four-digit ranges such as the 4245 or 6480 give the range in the thousands digit and the model in the remaining digits, and the 4X4 suffix marks four-wheel drive. The entry TE-A-20 belongs to the licence-built Ferguson TE-20 from the transitional years after the merger.

Read on 3 more paragraphs

The register lists here 40 versions with 22 to 216 kW from three- to eight-cylinder engines of 1,750 to 10,500 cm³, unladen weights of 1,100 to 9,200 kg, gross weights up to 13,180 kg, lengths of 2,769 to 5,200 mm, widths of 1,500 to 2,720 mm and heights up to 3,200 mm; torque ranges from 176.8 to 593 Nm at rated speeds of 1,600 to 2,250 rpm.

By unit numbers Massey Ferguson is one of the world's best-selling tractor brands, with strongholds in Britain, France and Scandinavia; the models listed here span the full range from yard tractor to large field tractor.

When buying used, on the smaller model years the radiator, head gasket and hydraulic pump matter, on the large 4x4 models the transfer case, front axle and electronics; rust on mudguards and steps is common on older models. Parts run through AGCO and Perkins as well as a broad independent market.

Sources: SpecCodex register, model data: Massey Ferguson (weitere Modelle), Massey Ferguson (AGCO, Hersteller)

Technical data

Engine

Power22 kWcorrect
Cylinders4correct
Displacement1,750 cm³correct

Dimensions and weights

Length2,810 mmcorrect
Width1,500 mmcorrect
Unladen weight1,350 kgcorrect

Where this model stands

Power-to-weight ratio: 16.3 kW/t (22 kW / 1.4 t)

Power class: Compact (< 40 hp)

Stronger than 16% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Massey Ferguson 130/1830-65 have?

The Massey Ferguson 130/1830-65 delivers 22 kW.

How much does the Massey Ferguson 130/1830-65 weigh?

The unladen weight is 1,350 kg.

What engine does the Massey Ferguson 130/1830-65 have?

4 cylinders, 1,750 cm³ displacement.

What are the dimensions of the Massey Ferguson 130/1830-65?

2,810 mm × 1,500 mm.

When was the Massey Ferguson 130/1830-65 built?

Production years: 1965.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare