Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks over 7.5 t › Liebherr › LTM 1150-6.1

Liebherr LTM 1150-6.1

Built: 2009 · Series: Other models

More machines from model year 2009

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Liebherr builds the LTM 1150-6.1. According to the available register data, the vehicle dates from 2009. Dimensions: 16,080 mm long and 2,750 mm wide. The unladen weight is 83,800 kg. The permitted gross weight is 84,000 kg. The engine delivers 400 kW, has 8 cylinders, with a displacement of 16,160 cm³. According to the Finnish vehicle register, one example of this model is on record.

Liebherr – other models: collective page of mobile cranes outside the named ranges, LG lattice-boom, compact LTC and telescopic LTM cranes, 205 to 440 kW

This page gathers Liebherr mobile cranes outside the named ranges – from the LG lattice-boom cranes through the compact LTC to the large LTM telescopic cranes. Liebherr, founded in 1949 by Hans Liebherr in Kirchdorf an der Iller in Upper Swabia and family-owned to this day, builds its mobile cranes at the Ehingen plant on the Danube. LTM stands for Liebherr-Teleskopmobilkran, LTC for the compact, manoeuvrable version with a shorter wheelbase, and LG for lattice-boom cranes on truck or crawler chassis; the following number roughly gives the maximum lifting capacity in tonnes, and the suffix after the hyphen the axle count and range generation.

Read on 3 more paragraphs

The register lists here 49 versions with outputs from 205 to 440 kW, displacements from 6,370 to 21,920 cm³ from six- to twelve-cylinders, operating weights from 23,750 to 95,750 kg against gross weights of 24,000 to 96,000 kg and widths from 2,500 to 3,000 mm.

Alongside Grove/Manitowoc and Tadano, Liebherr is one of the leading makers of mobile cranes and market leader in the German-speaking countries; the LTM range covers the whole spectrum from the compact two-axle crane to the large crane for wind-turbine and industrial assembly work.

On used examples, engine and crane-gear operating hours, the condition of the telescopic sections and cable drums, the tightness of the hydraulic cylinders, rust on the boom segments and, on the LG lattice cranes, the condition of the mast sections and pin joints all count; parts and service run through Liebherr's worldwide network.

Sources: Kennwerte der Modelle Liebherr (weitere Modelle), Liebherr (Hersteller)

Technical data

Engine

Power400 kWcorrect
Cylinders8correct
Displacement16,160 cm³correct

Dimensions and weights

Length16,080 mmcorrect
Width2,750 mmcorrect
Unladen weight83,800 kgcorrect
Gross vehicle weight84,000 kgcorrect

Where this model stands

Power-to-weight ratio: 4.8 kW/t (400 kW / 83.8 t)

Stronger than 91% of the trucks over 7.5 t in the register — out of 25,424 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Liebherr LTM 1150-6.1 have?

The Liebherr LTM 1150-6.1 delivers 400 kW.

How much does the Liebherr LTM 1150-6.1 weigh?

The unladen weight is 83,800 kg.

What is the gross vehicle weight of the Liebherr LTM 1150-6.1?

84,000 kg.

What engine does the Liebherr LTM 1150-6.1 have?

8 cylinders, 16,160 cm³ displacement.

What are the dimensions of the Liebherr LTM 1150-6.1?

16,080 mm × 2,750 mm.

When was the Liebherr LTM 1150-6.1 built?

Production years: 2009.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare