KRÖGER-FELIX
Built: 2004 · Series: Other models
More machines from model year 2004
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Kröger-Felix – other models: the collective page of car trailers up to 3.5 t outside the named ranges, from the G 2000 and G 2400 through the TF1 chassis to the 27TTB30.15, 537 to 680 kg unladen weight
This page gathers the Kröger-Felix trailers the register could not assign to a named range. The type plates visibly follow a modular system: G 2000 and G 2400 give roughly the gross weight in kilograms, the TF1 suffix marks a recurring chassis, and designations such as G2000-TF1/318+70 or G2400-TF1/325+70 attach further figures for load-bed and drawbar length to these base types. Alongside them stand longer codes such as 27TTB30.15, 27TTF40.20 and 27TTM40.20, which point to the same scheme of a range code with appended numeric values.
Read on 3 more paragraphs
The register lists 14 versions with unladen weights from 537 to 680 kg, gross weights from 2,000 to 2,700 kg, lengths from 4,040 to 5,600 mm and widths from 2,030 to 2,540 mm.
The narrow unladen-weight band alongside a high gross weight shows the character of this range: a comparatively light chassis carrying a high payload of up to around two tonnes, typical of tipper and transport trailers in agricultural and commercial use.
On a used purchase of this trailer type, the frame and tipping hydraulics count for rust and tightness, the condition of the side panels and load-bed floor, axles, brakes and the overrun brake unit, and lighting and registration papers. As the range is no longer carried in the current programme of a large manufacturer, spare parts mostly come through independent trailer workshops and chassis builders with a matching axle range.
Sources: SpecCodex register, model data: Kröger-Felix (weitere Modelle)
Technical data
Dimensions and weights
| Length | 5,450 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Unladen weight | 540 kgcorrect |
| Gross vehicle weight | 2,000 kgcorrect |
Frequently asked questions
How much does the KRÖGER-FELIX KRÖGER weigh?
The unladen weight is 540 kg.
What is the gross vehicle weight of the KRÖGER-FELIX KRÖGER?
2,000 kg.
What are the dimensions of the KRÖGER-FELIX KRÖGER?
5,450 mm × 2,500 mm.
When was the KRÖGER-FELIX KRÖGER built?
Production years: 2004.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
