KAESER MP27 PE
Built: 2015 · Series: Other models
More machines from model year 2015
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Kaeser – other models: collective page of the M range up to 750 kg outside the named types, from Coburg, unladen and gross weight 510 to 750 kg, length up to 3,635 mm
This page gathers the towable construction compressors of Kaeser that the register could not assign to a named range. The manufacturer, based in Coburg, builds the mobile compressor units on a single-axle, unbraked chassis of EU class O1; the type name M followed by a number from 20 to 50 orders the size, and suffixes such as PE or E mark electrically driven variants alongside the engine-driven base types. The Finnish model word 'vaunukompressori' (wagon compressor) shows that part of the registration data comes from Finland.
Read on 3 more paragraphs
The register lists here 21 versions with unladen weights from 510 to 750 kg, gross vehicle weights likewise from 510 to 750 kg, lengths from 2,540 to 3,635 mm and widths from 1,050 to 1,454 mm.
As unladen and gross weight lie close together in this range, the units stay entirely within the brake-free class up to 750 kg and can be towed by any car with sufficient tow capacity; Kaeser thus covers the need of trade workshops and small building sites for mobile compressed air without requiring a higher trailer licence category.
Buying used, check the operating hours and service state of the compressor unit, the condition of valves, filters and cooler, and on the chassis the axle, tyres and lighting system; Kaeser and its authorised workshops run a consistent spare-parts programme for the compressed-air technology.
Sources: SpecCodex register, model data: Kaeser (weitere Modelle), Kaeser Kompressoren (manufacturer), Zulassungsdaten Traficom (Finnland)
Technical data
Dimensions and weights
| Length | 3,512 mmcorrect |
|---|---|
| Width | 1,256 mmcorrect |
| Unladen weight | 750 kgcorrect |
| Gross vehicle weight | 750 kgcorrect |
Frequently asked questions
How much does the KAESER MP27 PE weigh?
The unladen weight is 750 kg.
What is the gross vehicle weight of the KAESER MP27 PE?
750 kg.
What are the dimensions of the KAESER MP27 PE?
3,512 mm × 1,256 mm.
When was the KAESER MP27 PE built?
Production years: 2015.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
