Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Faun Tadano › ATF › ATF 220G-5

Faun Tadano ATF 220G-5

Built: 2011 · Series: ATF

More machines from model year 2011

Source: tadano.co.th

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the ATF 220G-5, Faun Tadano offers a model from the ATF series. Production: 2011. The engine delivers 390 kW, has 8 cylinders, with a displacement of 15,928 cm³. The vehicle is 15,874 mm long and 3,000 mm wide. The unladen weight is 72,000 kg. The gross vehicle weight is 72,000 kg. The gearbox offers 16 gears. The ATF series covers 6 models. Rated output within it ranges from 290 to 405 kW; the ATF 220G-5 sits at the top of that range with 390 kW. Its immediate neighbours are the ATF 90G-4 below it with 320 kW and the ATF 180G-5 above it with 405 kW. Unladen weight within it ranges from 48,000 to 72,000 kg; here the ATF 220G-5 sits at the top of that range with 72,000 kg. 7 Faun Tadano models across 2 series are on record.

Faun-Tadano ATF – all-terrain cranes from Lauf an der Pegnitz: 290 to 405 kW, six- to eight-cylinders of 11.9 to 15.9 litres displacement, 48 to 72 t vehicle weight

Faun-Tadano ATF denotes the all-terrain cranes (All Terrain Faun) from the plant in Lauf an der Pegnitz in Bavaria, where FAUN has built mobile cranes suited to both road and off-road travel since the 1980s. In 1990 the Japanese crane maker Tadano of Takamatsu took over FAUN's crane division and continued the range under the joint Faun-Tadano brand. The ATF cranes run on multi-axle chassis with all axles steered and driven, allowing them to reach their lifting capacity both on the motorway and on the unpaved ground of a construction site.

Read on 3 more paragraphs

The register lists here 6 versions with 290 to 405 kW from six- to eight-cylinders of 11,946 to 15,928 cm³, vehicle weights from 48,000 to 72,000 kg, lengths from 12,385 to 15,983 mm and widths from 2,660 to 3,000 mm.

All-terrain cranes such as the ATF range are, alongside Liebherr and Grove, the reference in Europe for mobile lifting equipment in industrial and construction use, since they drive to the site without a special transport and there lift heavy loads using extendable outriggers and a telescopic boom.

On used ATF cranes, operating hours of the drivetrain and the crane works counted separately, the condition of the telescopic boom and winches, the sealing of the hydraulic cylinders, the function of the outriggers and the electronic load-moment limiter, and the inspection history under the regulations for lifting equipment count; spare parts run through Tadano service.

Sources: SpecCodex register, model data: Faun Tadano ATF, Tadano (manufacturer)

Technical data

Engine

Power390 kWcorrect
Cylinders8correct
Displacement15,928 cm³correct

Dimensions and weights

Length15,874 mmcorrect
Width3,000 mmcorrect
Unladen weight72,000 kgcorrect
Gross vehicle weight72,000 kgcorrect

Drivetrain and chassis

Gears16correct

Where this model stands

Power-to-weight ratio: 5.4 kW/t (390 kW / 72 t)

Stronger than 88% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Faun Tadano ATF 220G-5 have?

The Faun Tadano ATF 220G-5 delivers 390 kW.

How much does the Faun Tadano ATF 220G-5 weigh?

The unladen weight is 72,000 kg.

What is the gross vehicle weight of the Faun Tadano ATF 220G-5?

72,000 kg.

What engine does the Faun Tadano ATF 220G-5 have?

8 cylinders, 15,928 cm³ displacement.

What are the dimensions of the Faun Tadano ATF 220G-5?

15,874 mm × 3,000 mm.

When was the Faun Tadano ATF 220G-5 built?

Production years: 2011.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare