Technical register for agricultural, construction and commercial machinery · sourced data

ERDE ER 121

Built: 1999 · Series: Other models

More machines from model year 1999

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

ER 121 comes from the manufacturer ERDE. According to the available register data, the vehicle dates from 1999. The light trailer is 1,920 mm long and 1,260 mm wide. Its kerb weight comes to 60 kg. Fully loaded, it may not exceed 400 kg. The Finnish vehicle register lists one example of this model.

Erde – other models: French collective page of the O1 class up to 750 kg outside the named ranges, unladen weight 50 to 260 kg, length 1,110 to 3,300 mm

This page gathers the small trailers of Erde that the register could not assign to a named range. The French manufacturer builds trailers of EU class O1 up to 750 kg gross weight in several ranges, identifiable by the type codes ERDE, CH, PM and RX and by the Daxara marque, which carries a number such as '105' or '218' for the size.

Read on 3 more paragraphs

The register lists here 38 versions with unladen weights from 50 to 260 kg, gross vehicle weights from 300 to 750 kg, lengths from 1,110 to 3,300 mm and widths from 1,080 to 1,862 mm.

Small trailers of this class are used by private owners, DIY users and small trade businesses, and their low unladen weight lets them be towed by smaller cars too; the wide size range from compact versions to long boat-trailer variants covers correspondingly varied loads, from garden waste to boats and small machines. Several models in the list appear under the Daxara name, sold through general outdoor and boating retailers alongside the Erde-branded versions.

Buying used, check the condition of frame and load floor, the function of the lighting system, and on braked versions the overrun brake; on the long boat-trailer variants also check the condition of the keel rollers and skid rails. Parts for frame, lighting and coupling come from the general trailer parts trade, and for the Daxara marque also from specialist boating accessory suppliers.

Sources: SpecCodex register, model data: Erde (weitere Modelle)

Technical data

Dimensions and weights

Length1,920 mmcorrect
Width1,260 mmcorrect
Unladen weight60 kgcorrect
Gross vehicle weight400 kgcorrect

Frequently asked questions

How much does the ERDE ER 121 weigh?

The unladen weight is 60 kg.

What is the gross vehicle weight of the ERDE ER 121?

400 kg.

What are the dimensions of the ERDE ER 121?

1,920 mm × 1,260 mm.

When was the ERDE ER 121 built?

Production years: 1999.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare