Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › David Brown › Other models › 996-995-6-8-Q-4x4/2080

David Brown 996-995-6-8-Q-4x4/2080

Built: 1979 · Series: Other models

More machines from model year 1979

Source: truck1.eu

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 996-995-6-8-Q-4x4/2080 comes from David Brown. Production: 1979. The engine has 4 cylinders, with a displacement of 3,590 cm³. The unladen weight is 3,160 kg. The gross vehicle weight is 6,500 kg. Unladen weight across the David Brown range ranges from 950 to 4,345 kg; the 996-995-6-8-Q-4x4/2080 sits in the upper part of that range with 3,160 kg. Its immediate neighbours are the 1490 (A) below it with 3,140 kg and the 1212 above it with 3,240 kg. Gross vehicle weight across the David Brown range ranges from 1,950 to 9,500 kg; here the 996-995-6-8-Q-4x4/2080 sits in the upper part of that range with 6,500 kg. 147 David Brown models across 19 series are on record.

David Brown – other models: the collective page of British tractors outside the named ranges, from the Cropmaster and the 850/880 Implematic to the 990 and 1210, 24.5 to 67 kW, three- to six-cylinder diesel engines

This page gathers the David Brown tractors the register could not assign to a named range – the British marque from Meltham near Huddersfield that grew out of a gear works and, together with Harry Ferguson in 1936, developed the first series-built British tractor with hydraulics, before the two parted ways in 1939 and David Brown began building its own tractors. The Cropmaster of the early 1950s is regarded as one of the first tractors with a factory-fitted driver's cab; the 900 series brought the Implematic three-point hydraulics with draft control, marked by the Implematic suffix on the 850 and 880 types. The four-digit type logic of the 1960s and 1970s orders the range in the first digit, while the number after the slash (880/1910, 990/2000) states the gearbox or hydraulics variant and the year of revision; in 1965 the British Tube Investments group took the majority stake, and in 1972 David Brown finally sold the tractor division to the American J.I. Case, which continued the brand into the late 1980s.

Read on 3 more paragraphs

The register lists here 28 versions with 24.5 to 67 kW from three- to six-cylinders of 2,520 to 5,390 cm³ displacement, unladen weights from 1,580 to 4,210 kg, gross weights from 4,000 to 9,500 kg and torque from 169 to 314 Nm at 2,000 to 2,300 rpm.

David Brown was, into the 1970s, one of the major British tractor makers alongside Ford and Massey Ferguson, and shaped post-war British tractor building with the Implematic hydraulics and the Cropmaster's early factory cab.

On used examples, the condition of the gearbox and clutch, the tightness of the Implematic hydraulics, rust on mudguards and bonnet, the state of alternator and starter motor, and on the older models the availability of gaskets count; parts are carried by specialist dealers in classic British tractors and the Case IH network.

Sources: SpecCodex register, model data: David Brown (weitere Modelle), Case IH (Nachfolgemarke, Hersteller)

Technical data

Engine

Cylinders4correct
Displacement3,590 cm³correct

Dimensions and weights

Unladen weight3,160 kgcorrect
Gross vehicle weight6,500 kgcorrect

Frequently asked questions

How much does the David Brown 996-995-6-8-Q-4x4/2080 weigh?

The unladen weight is 3,160 kg.

What is the gross vehicle weight of the David Brown 996-995-6-8-Q-4x4/2080?

6,500 kg.

What engine does the David Brown 996-995-6-8-Q-4x4/2080 have?

4 cylinders, 3,590 cm³ displacement.

When was the David Brown 996-995-6-8-Q-4x4/2080 built?

Production years: 1979.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare