Cbi 6800P MAGNUM FORCE
Built: 2006 · Series: Other models
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Cbi 484VR – class O4 trailer: 27,000 kg gross weight, 17,270 kg unladen weight, 9.68 m length, registered in Finland, model year 2019
With a gross weight of 27,000 kg, the 484VR falls into EU class O4, the heavy trailers above 10 tonnes. The trailer is registered in Finland and was built in 2019.
Read on 3 more paragraphs
At a length of 9,684 mm and a width of 2,500 mm, it already weighs 17,270 kg unladen and can carry only 9,730 kg more, just over a third of its gross weight. Such a high unladen weight at a comparatively short length points to a massively built special trailer, in which the structure itself accounts for a significant share of the gross weight, rather than a light design aimed at maximum payload.
Trailers of this weight class run with an air-brake system, and towing the combination requires a category CE licence. A high unladen weight at a comparatively short length is common on trailers for heavy, compact loads such as construction machinery or steel parts, where the load platform itself must be reinforced and low.
What counts on a used example is the condition of the axle suspension and brake system under the high axle load, cracks in the frame around the axle mounts, the state of the load platform and its lashing points, the tightness of the air suspension, and the tread depth and load capacity of the tyres, which are already heavily stressed unladen given this self-weight. Given the heavy build for its length, it is also worth confirming that the chassis has not been reinforced or repaired in a way that affects its original type approval.
Sources: SpecCodex-Register: Kennwerte des Modells Cbi 484VR
Technical data
Dimensions and weights
| Length | 12,497 mmcorrect |
|---|---|
| Width | 3,056 mmcorrect |
| Unladen weight | 22,000 kgcorrect |
Frequently asked questions
How much does the Cbi 6800P MAGNUM FORCE weigh?
The unladen weight is 22,000 kg.
What are the dimensions of the Cbi 6800P MAGNUM FORCE?
12,497 mm × 3,056 mm.
When was the Cbi 6800P MAGNUM FORCE built?
Production years: 2006.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 4 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
4800 EU MAGNUM FORCE
484VR
Continental Magnum Force
MAGNUM FORCE 5400BP
MAGNUM FORCE SERIES 8400
Magnum Force 8400
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.