Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Case › Other models › 1455 XL-4X4/2800

Case 1455 XL-4X4/2800

Built: 1989 · Series: Other models

More machines from model year 1989

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case 1455 XL-4X4/2800 is a machine built by Case. Production: 1989. The engine delivers 107 kW, with a displacement of 6,580 cm³. The machine is 2,450 mm wide. The unladen weight is 6,730 kg. Rated output across the Case range ranges from 8.9 to 475.8 kW; the 1455 XL-4X4/2800 sits in the lower part of that range with 107 kW. Its immediate neighbours are the C S150 below it with 106.6 kW and the 1650L LGP above it with 107.4 kW. Unladen weight across the Case range ranges from 1,250 to 81,000 kg; here the 1455 XL-4X4/2800 sits at the bottom of that range with 6,730 kg. 636 Case models across 32 series are on record.

Case – other models: the collective page of US tractors outside the named ranges, from the drawbar-belt types such as the 10-20 through the 94 series to the 1200 Traction King, 13 to 324 kW

This page gathers the Case tractors the register could not assign to a named range – from the pre-war classics to the big four-wheel-drive tractors of the late 20th century. J. I. Case was founded in 1842 in Racine, Wisconsin, and has built tractors since the 1910s; in 1985 the farm-equipment division merged with International Harvester to form Case IH, and since 1999 the brand has belonged to CNH. On early types such as the 10-20, 12-25, 15-27, 18-32 and 22-40 the first number gives the standardised drawbar power and the second the belt power, as was customary for US tractors before 1930. The 1980s range with the ending 94 – such as the 1394, 1594, 1694, 2094, 2294, 2390 and 2670 – is known as the "94 series", the first digit giving roughly the size class. The 1200 Traction King of 1969 was one of the maker's first articulated four-wheel-drive tractors. The engines, per the register, come almost exclusively from Case's own production.

Read on 3 more paragraphs

The register lists here 197 versions with 13 to 323.6 kW or 10 to 440 hp from three- to six-cylinders of 2,040 to 14,945 cm³, unladen weights from 1,250 to 17,917 kg and torque from 289 to 972 Nm.

For decades, alongside John Deere and International Harvester, Case was one of the three big US tractor brands and was strongly represented in North America and Australia; the articulated big tractors of the Traction King and Steiger tradition competed for the prairie farms, while the smaller 94-series types served the standard segment of family farms.

On used tractors, originality and the condition of engine and belt pulley count on the pre-war classics, transmission, hydraulics and electrics on the 94-series types, articulation, four-wheel drive and tyres on the articulated big tractors, and rust on sheet metal and cab throughout; parts run through the Case IH and CNH network.

Sources: SpecCodex register, model data: Case (weitere Modelle), Case IH (CNH Industrial, Hersteller)

Technical data

Engine

Power107 kWcorrect
Displacement6,580 cm³correct

Dimensions and weights

Width2,450 mmcorrect
Unladen weight6,730 kgcorrect

Where this model stands

Power-to-weight ratio: 15.9 kW/t (107 kW / 6.7 t)

Power class: Large (100–180 hp)

Stronger than 82% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case 1455 XL-4X4/2800 have?

The Case 1455 XL-4X4/2800 delivers 107 kW.

How much does the Case 1455 XL-4X4/2800 weigh?

The unladen weight is 6,730 kg.

What engine does the Case 1455 XL-4X4/2800 have?

6,580 cm³ displacement.

When was the Case 1455 XL-4X4/2800 built?

Production years: 1989.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare