Aj Metals SAFWRZM11035
Built: 2007 · Series: Other models
More machines from model year 2007
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Aj Metals AJ-METALS – class O4 trailer with 54,000 kg gross weight, only 9,020 kg unladen weight and a 44,980 kg payload, Finland
The company name Aj Metals points to a focus on metal trading or transport. The AJ-METALS model is registered in Finland and, at a gross weight of 54,000 kg, belongs to EU trailer class O4, the heavy trailers above 10 tonnes.
Read on 3 more paragraphs
At a gross weight of 54,000 kg, the trailer has an unladen weight of only 9,020 kg, giving an unusually high payload of 44,980 kg. Body length is 14,270 mm at a width of 2,460 mm. Such a low unladen weight against such a high gross weight is typical of vehicles carrying compact, dense goods such as steel coils, sheet metal or profiles rather than bulky material.
At a gross weight of 54 tonnes, a multi-axle design with an air brake system is essential, as required in class O4, while the overrun brake of classes O1 and O2 is not permitted here. Transporting metal coils or sheets also requires secure, rigid load restraint using stanchions or straps, since the load's weight concentrates on a small footprint. Towing requires a category CE licence.
When buying a metal-hauling trailer used, the condition of the load bed and the stanchions or lashing points matters most, since sharp-edged loads place heavy strain on them. The chassis and axle brackets should be checked for deformation from point overloading, and the air brake system with its lines and coupling heads should be tested, along with the axles and wheel bearings. Axles and brake components from major suppliers such as BPW or SAF make spare parts easier to source independently of the vehicle maker.
Sources: SpecCodex-Register: Kennwerte des Modells Aj Metals AJ-METALS
Technical data
Dimensions and weights
| Length | 4,350 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Unladen weight | 1,500 kgcorrect |
| Gross vehicle weight | 11,000 kgcorrect |
Frequently asked questions
How much does the Aj Metals SAFWRZM11035 weigh?
The unladen weight is 1,500 kg.
What is the gross vehicle weight of the Aj Metals SAFWRZM11035?
11,000 kg.
What are the dimensions of the Aj Metals SAFWRZM11035?
4,350 mm × 2,500 mm.
When was the Aj Metals SAFWRZM11035 built?
Production years: 2007.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
