SILCA SW 1
Built: 2003–2005 · Series: Other models
More machines from model year 2003
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
SILCA – other models: the collective page of utility trailers outside the named ranges, from the SCW and SPW to the STW 2250 and SVW-1700, unladen weight 800 to 2,640 kg, gross weight 1,300 to 3,000 kg
This page gathers the SILCA trailers the register could not assign to a named range. The line-up is structured in codes such as SCW, SPW, STW and SVW, each with an appended number from 1700 to 2250 marking the size class, plus the special versions SVV LED, STW 1700 Rain and STW Rain. Several codes recur at different numeric values, so the same chassis width appears in the register in several body variants.
Read on 3 more paragraphs
The register lists here 19 versions with unladen weights from 800 to 2,640 kg, gross weights from 1,300 to 3,000 kg, lengths from 4,800 to 5,550 mm and widths from 1,700 to 2,400 mm.
With payloads between 500 and just over 1,000 kg and lengths around 5 metres, the SILCA line sits in the mid-range of utility trailers used in trades, landscaping and the commercial transport of machinery and materials. The spread from the plain flatbed through the LED-lit version to the Rain weather-protection variant shows that one base chassis is built for several uses.
Used, in this trailer class the frame and load bed should be checked for rust and distortion, along with axle, tyres and brake system, the function of the overrun brake and lighting, and on the Rain versions the condition of the tarpaulin and its tensioning mechanism. On models with extra lighting, the wiring and the plug to the tow vehicle belong in the check too; a current inspection report gives the quickest overview of technical condition here.
Sources: SpecCodex register, model data: SILCA (weitere Modelle)
Technical data
Dimensions and weights
| Length | 5,120 mmcorrect |
|---|---|
| Width | 2,260 mmcorrect |
| Wheelbase | 800 mmcorrect |
| Unladen weight | 2,640 kgcorrect |
| Gross vehicle weight | 3,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the SILCA SW 1 weigh?
The unladen weight is 2,640 kg.
What is the gross vehicle weight of the SILCA SW 1?
3,000 kg.
Up to what speed is the SILCA SW 1 approved?
Approved up to 100 km/h.
What are the dimensions of the SILCA SW 1?
5,120 mm × 2,260 mm.
When was the SILCA SW 1 built?
Production years: 2003–2005.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
