Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Mercedes Benz › Arocs › AROCS 4245

Mercedes Benz AROCS 4245

Built: 2019 · Series: Arocs

More machines from model year 2019

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the AROCS 4245, Mercedes Benz offers a model from the Arocs series. Production: 2019. The engine has 6 cylinders, with a displacement of 12,809 cm³. The vehicle is 8,650 mm long and 2,550 mm wide. The unladen weight is 15,150 kg. The wheelbase measures 5,990 mm. The gross vehicle weight is 41,500 kg. The vehicle runs on 8 wheels. The Arocs series covers 126 models. Unladen weight within it ranges from 7,390 to 61,500 kg; the AROCS 4245 sits at the bottom of that range with 15,150 kg. Its immediate neighbours are the 3251 LK 8x4 below it with 14,730 kg and the AROCS 3940 above it with 15,240 kg. Gross vehicle weight within it ranges from 16,500 to 62,000 kg; here the AROCS 4245 sits in the middle of that range with 41,500 kg. 8330 Mercedes Benz models across 126 series are on record.

Mercedes-Benz Arocs – Mercedes-Benz Trucks' construction range from Wörth am Rhein since 2013: L, K and LK as chassis variants, engine outputs of 265 to 460 kW, displacements of 10.7 to 15.6 litres

The Arocs is Mercedes-Benz Trucks' construction and heavy-haulage range, introduced in 2013 as a standalone line alongside the Actros and Antos and built at the Wörth am Rhein plant; it took over the previous construction variants of the Actros for tippers, mixers and crane chassis. In the type designation the first digits denote weight class and engine power, the letters the chassis variant: L the standard version, K the tipper, LK a combination of both, B a construction all-wheel-drive variant.

Read on 3 more paragraphs

The register lists 126 versions with engine outputs of 265 to 460 kW, displacements of 10,677 to 15,569 cm³ and six to eight cylinders.

The Arocs covers Mercedes-Benz Trucks' construction segment and competes chiefly with the MAN TGS, the Scania XT and the Volvo FMX; its domain is tippers, concrete mixers, crane and hook-lift vehicles with reinforced frames and a low-range gearbox for construction-site use off made-up roads. Unlike its long-haul sister the Actros, the Arocs is designed for short wheelbases, high ground clearance and a wide range of axle configurations from 6x2 to 10x8, as also seen in the model line-up from 8x4 tippers to 10x8 special chassis.

On a used example, what counts is the condition of the frame and tipper hydraulics, wear on differential locks and the low-range gearbox, corrosion on axles and body mounting points, the condition of the engine and exhaust after-treatment, and parts supply through Mercedes-Benz's dense workshop network.

Sources: SpecCodex register, model data: Mercedes-Benz Arocs, Mercedes-Benz Trucks (Daimler Truck, Hersteller)

Technical data

Engine

Cylinders6correct
Displacement12,809 cm³correct

Dimensions and weights

Length8,650 mmcorrect
Width2,550 mmcorrect
Wheelbase5,990 mmcorrect
Unladen weight15,150 kgcorrect
Gross vehicle weight41,500 kgcorrect

Drivetrain and chassis

Wheels8correct

Frequently asked questions

How much does the Mercedes Benz AROCS 4245 weigh?

The unladen weight is 15,150 kg.

What is the gross vehicle weight of the Mercedes Benz AROCS 4245?

41,500 kg.

What engine does the Mercedes Benz AROCS 4245 have?

6 cylinders, 12,809 cm³ displacement.

What are the dimensions of the Mercedes Benz AROCS 4245?

8,650 mm × 2,550 mm.

When was the Mercedes Benz AROCS 4245 built?

Production years: 2019.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare