Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Mercedes Benz › Arocs › AROCS 3546

Mercedes Benz AROCS 3546

Built: 2023 · Series: Arocs

More machines from model year 2023

Source: landwirt.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Mercedes Benz AROCS 3546 is a model in the Arocs series. Production: 2023. The engine has 6 cylinders, with a displacement of 10,677 cm³. The vehicle is 10,890 mm long and 2,550 mm wide. The unladen weight is 21,265 kg. The wheelbase measures 6,870 mm. Top speed is 90 km/h. The gross vehicle weight is 35,000 kg. The vehicle runs on 8 wheels. The Arocs series covers 126 models. Unladen weight within it ranges from 7,390 to 61,500 kg; the AROCS 3546 sits in the lower part of that range with 21,265 kg. Its immediate neighbours are the AROCS 4953 below it with 21,168 kg and the AROCS 4347 WSG above it with 21,520 kg. Gross vehicle weight within it ranges from 16,500 to 62,000 kg; here the AROCS 3546 sits in the middle of that range with 35,000 kg. 8330 Mercedes Benz models across 126 series are on record.

Mercedes-Benz Arocs – Mercedes-Benz Trucks' construction range from Wörth am Rhein since 2013: L, K and LK as chassis variants, engine outputs of 265 to 460 kW, displacements of 10.7 to 15.6 litres

The Arocs is Mercedes-Benz Trucks' construction and heavy-haulage range, introduced in 2013 as a standalone line alongside the Actros and Antos and built at the Wörth am Rhein plant; it took over the previous construction variants of the Actros for tippers, mixers and crane chassis. In the type designation the first digits denote weight class and engine power, the letters the chassis variant: L the standard version, K the tipper, LK a combination of both, B a construction all-wheel-drive variant.

Read on 3 more paragraphs

The register lists 126 versions with engine outputs of 265 to 460 kW, displacements of 10,677 to 15,569 cm³ and six to eight cylinders.

The Arocs covers Mercedes-Benz Trucks' construction segment and competes chiefly with the MAN TGS, the Scania XT and the Volvo FMX; its domain is tippers, concrete mixers, crane and hook-lift vehicles with reinforced frames and a low-range gearbox for construction-site use off made-up roads. Unlike its long-haul sister the Actros, the Arocs is designed for short wheelbases, high ground clearance and a wide range of axle configurations from 6x2 to 10x8, as also seen in the model line-up from 8x4 tippers to 10x8 special chassis.

On a used example, what counts is the condition of the frame and tipper hydraulics, wear on differential locks and the low-range gearbox, corrosion on axles and body mounting points, the condition of the engine and exhaust after-treatment, and parts supply through Mercedes-Benz's dense workshop network.

Sources: SpecCodex register, model data: Mercedes-Benz Arocs, Mercedes-Benz Trucks (Daimler Truck, Hersteller)

Technical data

Engine

Cylinders6correct
Displacement10,677 cm³correct

Dimensions and weights

Length10,890 mmcorrect
Width2,550 mmcorrect
Wheelbase6,870 mmcorrect
Unladen weight21,265 kgcorrect
Gross vehicle weight35,000 kgcorrect

Drivetrain and chassis

Wheels8correct
Top speed90 km/hcorrect

Frequently asked questions

How much does the Mercedes Benz AROCS 3546 weigh?

The unladen weight is 21,265 kg.

What is the gross vehicle weight of the Mercedes Benz AROCS 3546?

35,000 kg.

What engine does the Mercedes Benz AROCS 3546 have?

6 cylinders, 10,677 cm³ displacement.

How fast does the Mercedes Benz AROCS 3546 go?

Top speed is 90 km/h.

What are the dimensions of the Mercedes Benz AROCS 3546?

10,890 mm × 2,550 mm.

When was the Mercedes Benz AROCS 3546 built?

Production years: 2023.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Used equipment offers
1 current listings for Mercedes Benz AROCS 3546 on Hutnia.com.
View offers on Hutnia.com →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare