Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Kuhr › Other models › -

Kuhr -

Built: 1978–1985 · Series: Other models

More machines from model year 1978

The photo shows the KUHR from the same series. Source: kleinanzeigen.de
Kuhr builds this trailer. According to the available register data, the recorded vehicles date from 1978 to 1985. Dimensions: 12,400 mm long and 2,500 mm wide. Empty, it weighs 6,900 kg. The permitted gross weight is 14,000 kg. Axle to axle, the wheelbase is 7,250 mm. It reaches up to 100 km/h. According to the Dutch vehicle register, 2 examples of this model are on record.

Kuhr: an O4-class EU trailer registered in 1972, with an 18,500 kg gross weight, 6,920 kg kerb weight and a length of 13.53 m.

At a gross weight of 18,500 kg, the Kuhr trailer falls into the EU O4 class, the heavy trailers above 10 tonnes towed behind lorries or tractor units. The unit recorded in the register was registered in 1972, making it one of the older model years in this collection of single-model series.

Read on 3 more paragraphs

With a kerb weight of 6,920 kg and a length of 13.53 m, the payload comes to 11,580 kg, a good three fifths of the gross weight. For a length of more than 13.5 m, an 18,500 kg gross weight is comparatively moderate, pointing to a design meant for bulky rather than extremely dense cargo. A 9.20 m wheelbase and 2.52 m width fit a long, two-axle build.

As an O4-class vehicle, the trailer needs an air brake system and is towed under a category CE licence. The combination of great length and moderate gross weight suits bulky, lighter goods such as agricultural equipment, building elements or unit loads needing more floor space than carrying capacity.

Buying a used trailer of this model year, the chassis and side rails deserve particular attention, since decades of use favour corrosion and material fatigue. It is also worth checking the air system for modern retrofits, the axle bearings and brakes, the coupling for wear, and whether the registration documents match the chassis and its identification plate, especially after this many years in service.

Sources: SpecCodex-Register: Kennwerte des Modells KUHR

Technical data

Dimensions and weights

Length12,400 mmcorrect
Width2,500 mmcorrect
Wheelbase7,250 mmcorrect
Unladen weight6,900 kgcorrect
Gross vehicle weight14,000 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the Kuhr - weigh?

The unladen weight is 6,900 kg.

What is the gross vehicle weight of the Kuhr -?

14,000 kg.

Up to what speed is the Kuhr - approved?

Approved up to 100 km/h.

What are the dimensions of the Kuhr -?

12,400 mm × 2,500 mm.

When was the Kuhr - built?

Production years: 1978–1985.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare