KROEGER FELIX 30 TMF45.20
Built: 2000 · Series: Other models
More machines from model year 2000
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Kröger Felix – other models: the collective page of car trailers from manufacturer Felix Kröger of Bargteheide near Hamburg, outside the named types, 1,500 to 3,000 kg gross weight
Felix Kröger Fahrzeugbau, based in Bargteheide near Hamburg, is one of the larger German suppliers of car trailers and, alongside its own ranges, carries a wide selection from other manufacturers. This page gathers the trailers sold under the Kröger Felix name that the register could not assign to a named range, including the types 12 BTL 48.17, 25TTG4020, 27TTL36.15 and 30 TMF45.20 as well as the model G2400/S.
Read on 3 more paragraphs
The register lists here 6 versions with unladen weights of 580 to 890 kg, gross weights of 1,500 to 3,000 kg, a length of 5,530 mm and widths of 2,020 to 2,490 mm.
With gross weights up to 3,000 kg, the Kröger Felix trailers reach the upper end of category O2 and are suited to hauling construction machinery, vehicles or bulk material behind suitably rated towing vehicles. The large ratio of payload to unladen weight makes them attractive both to trade users and to private owners with larger transport needs. This class covers everything from light flatbed trailers to heavier versions built for hauling two- or four-wheeled vehicles.
On a used car trailer of this class, check the condition of the overrun brake and brake linings, axles and wheel bearings, the load bed and side panels, and corrosion on the frame and coupling. It is also worth checking the ramps and tie-down points on versions built for vehicle transport. Spare parts are stocked by the nationwide German trailer trade, which includes Felix Kröger's own parts mail order.
Sources: SpecCodex register, model data: Kröger Felix (weitere Modelle), Felix Kröger Fahrzeugbau (manufacturer)
Technical data
Dimensions and weights
| Width | 2,080 mmcorrect |
|---|---|
| Wheelbase | 700 mmcorrect |
| Unladen weight | 760 kgcorrect |
| Gross vehicle weight | 3,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the KROEGER FELIX 30 TMF45.20 weigh?
The unladen weight is 760 kg.
What is the gross vehicle weight of the KROEGER FELIX 30 TMF45.20?
3,000 kg.
Up to what speed is the KROEGER FELIX 30 TMF45.20 approved?
Approved up to 100 km/h.
When was the KROEGER FELIX 30 TMF45.20 built?
Production years: 2000.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
