Hueffermann Transsysteme ANH F.ATL
Built: 2006 · Series: Other models
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Hüffermann Transsysteme – other models: the collective page of trailers outside the named ranges, HAR, HMA, HPA and HSF types, gross weights from 20,000 to 36,000 kg and lengths up to nearly 14 m
This page gathers the Hüffermann Transsysteme trailers the register could not assign to a named range. The type designations HAR, HMA, HPA and HSF, each followed by two number pairs separated by a dot, mark different trailer variants for carrying swap bodies and containers. Unladen weights of 3.7 to 7.3 tonnes at gross weights of 20 to 36 tonnes show a heavy commercial-vehicle class for combined-transport haulage.
Read on 3 more paragraphs
The register lists here 14 versions with unladen weights from 3,698 to 7,334 kg, gross weights from 20,000 to 36,000 kg, lengths from 9,570 to 13,980 mm and widths from 2,450 to 2,550 mm.
Trailers of this class carry swap bodies, containers and skip containers in combined road-and-rail transport and in waste and construction logistics; the long loading platform allows bodies of different lengths to be exchanged on the same chassis. Operators value this system above all for the short standing time when changing bodies, which markedly raises vehicle utilisation compared with classic box semi-trailers.
On a used purchase, the condition and operation of the locks for changing the body, the condition of the frame for twisting and cracks, axles and braking system, the condition of the rollers or slide rails, and corrosion on the load-bearing longitudinal members all count.
Sources: SpecCodex register, model data: Hüffermann Transsysteme (weitere Modelle)
Technical data
Dimensions and weights
| Length | 9,690 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 5,130 mmcorrect |
| Unladen weight | 4,550 kgcorrect |
| Gross vehicle weight | 28,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Hueffermann Transsysteme ANH F.ATL weigh?
The unladen weight is 4,550 kg.
What is the gross vehicle weight of the Hueffermann Transsysteme ANH F.ATL?
28,000 kg.
Up to what speed is the Hueffermann Transsysteme ANH F.ATL approved?
Approved up to 100 km/h.
What are the dimensions of the Hueffermann Transsysteme ANH F.ATL?
9,690 mm × 2,550 mm.
When was the Hueffermann Transsysteme ANH F.ATL built?
Production years: 2006.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
HAR 18.67
HAR 20.70
HAR 27.70
HAR 30.67
HAR20.67
HMA 20.72
HMA 24.24
HMA 30.96
HPA 24.83
HPA 28.72
HPA 30.75
HSF 36.12
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
