Grw Engineering TS63 S3C
Built: 2020 · Series: Other models
More machines from model year 2020
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
GRW Engineering – other models: the collective page of semi-trailers outside the named ranges, TS63 S3C, 5,540 to 6,860 kg unladen weight, 40,000 to 42,000 kg gross weight
This page gathers the GRW Engineering semi-trailers the register could not assign to a named range – with only one named range in the register, this amounts to practically the whole recorded catalogue. GRW Engineering is a South African manufacturer of tanker and tipping semi-trailers; the register shows the TS63 S3C type.
Read on 3 more paragraphs
The register lists here 3 versions with unladen weights from 5,540 to 6,860 kg, gross weights from 40,000 to 42,000 kg, lengths from 12,000 to 13,740 mm and a width of 2,550 mm.
With gross weights around 40,000 to 42,000 kg and lengths of up to almost 13.7 m, the versions belong to the heavy-duty semi-trailer class, used in road haulage for bulk goods, liquids or mass cargo. The width of 2,550 mm matches the permitted maximum width for commercial vehicles.
On a used tanker or tipping semi-trailer, the condition of the tank or tipping body for cracks and corrosion, the function of the discharge or tipping mechanism including hydraulics, axle and brake condition, and the tightness of valves and fastenings all count in particular. Parts run through the manufacturer or specialist semi-trailer workshops experienced in heavy haulage. For operation behind the tractor unit, besides the trailer's rated gross weight the tractor's rated towing capacity is also decisive, since it sets the real limit in heavy-duty operation.
Sources: SpecCodex register, model data: GRW Engineering (weitere Modelle)
Technical data
Dimensions and weights
| Length | 13,740 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 9,080 mmcorrect |
| Unladen weight | 6,860 kgcorrect |
| Gross vehicle weight | 42,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Grw Engineering TS63 S3C weigh?
The unladen weight is 6,860 kg.
What is the gross vehicle weight of the Grw Engineering TS63 S3C?
42,000 kg.
Up to what speed is the Grw Engineering TS63 S3C approved?
Approved up to 100 km/h.
What are the dimensions of the Grw Engineering TS63 S3C?
13,740 mm × 2,550 mm.
When was the Grw Engineering TS63 S3C built?
Production years: 2020.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
