Global Fahrzeugtechnik Gm GL 4200 313
Built: 2026 · Series: Other models
More machines from model year 2026
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Global Fahrzeugtechnik GM – other models: the collective page of vacuum tanker trailers outside the named ranges, the GL range from 2,800 to 4,200 litres, 1 to 1.7 t unladen weight, up to 3.5 t gross weight
This page gathers the Global Fahrzeugtechnik GM trailers the register could not assign to a named range. The programme consists of vacuum tanker trailers in the GL range, whose number gives the tank capacity in litres (2,800, 3,200 and 4,200 litres), with the suffix Vakuum or VAK for the version with a vacuum pump. With unladen weights from around a tonne to 1.7 tonnes and lengths of 4.15 to 5.74 metres, all five models are compact single- or twin-axle trailers for towing behind a tractor.
Read on 3 more paragraphs
The register lists here 5 versions with unladen weights from 1,011 to 1,704 kg, gross weights from 1,800 to 3,500 kg, lengths from 4,150 to 5,740 mm and widths from 2,250 to 2,550 mm.
Vacuum tanker trailers of this size serve farms for spreading and hauling slurry and liquid manure and are towed behind a tractor; the capacity of up to 4,200 litres suits smaller and mid-sized holdings. Unlike the large tankers used by agricultural contractors, these versions stay light enough to be towed by smaller farm tractors too.
On used vacuum tankers, the condition of the tank inside and out for corrosion matters, the function of the vacuum pump and valves, hoses and couplings, chassis and axle, and the drive shaft for the pump. The dome-cover seals and the pump's mounting to the frame are also worth checking for wear; spare parts run through the manufacturer and agricultural-equipment specialists.
Sources: SpecCodex register, model data: Global Fahrzeugtechnik GM (weitere Modelle)
Technical data
Dimensions and weights
| Length | 5,710 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 3,640 mmcorrect |
| Unladen weight | 1,346 kgcorrect |
| Gross vehicle weight | 1,800 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Global Fahrzeugtechnik Gm GL 4200 313 weigh?
The unladen weight is 1,346 kg.
What is the gross vehicle weight of the Global Fahrzeugtechnik Gm GL 4200 313?
1,800 kg.
Up to what speed is the Global Fahrzeugtechnik Gm GL 4200 313 approved?
Approved up to 100 km/h.
What are the dimensions of the Global Fahrzeugtechnik Gm GL 4200 313?
5,710 mm × 2,550 mm.
When was the Global Fahrzeugtechnik Gm GL 4200 313 built?
Production years: 2026.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
