Genie TZ50
Built: 2004–2020 · Series: Other models
More machines from model year 2004
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Genie – further models: the collective page for trailer-mounted boom lifts beyond the named series, TZ-34 and TZ-50, kerb weights 1,200 to 2,400 kg, lengths up to 7,400 mm
This page gathers the Genie trailers that the register could not assign to any named series. Genie belongs to Terex and builds, among other things, boom lifts in Redmond, Washington, that are mounted on a trailer instead of on a self-propelled chassis; the designation Trailer Boom and the types TZ-34 and TZ-50 stand for these towable platforms. The digits in the types TZ-34 and TZ-50 denote, following Genie's usual system, the working height in feet.
Read on 3 more paragraphs
The register lists 15 versions here with kerb weights from 1,200 to 2,400 kg, gross vehicle weights from 1,300 to 2,400 kg, lengths from 7,180 to 7,400 mm and widths from 1,410 to 1,770 mm.
Such trailer-mounted work platforms allow work at height in places where a self-propelled unit would be too expensive, too heavy, or unsuitable for the road due to lacking its own approval, for example in tree care, facade work or event technology.
When buying used, what counts is the condition of the hydraulics and boom bearings, the tightness of the cylinders, the function of the emergency lowering and safety devices, the condition of the frame and axle for corrosion, and the brake and lighting; a current inspection certificate for the platform itself is essential when buying. A complete operating manual and proof of regular maintenance of the lifting mechanism should also be checked before buying.
Sources: SpecCodex register, model data: Genie, Genie (Terex, Hersteller)
Technical data
Dimensions and weights
| Width | 1,700 mmcorrect |
|---|---|
| Wheelbase | 4,260 mmcorrect |
| Unladen weight | 2,200 kgcorrect |
| Gross vehicle weight | 2,200 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Genie TZ50 weigh?
The unladen weight is 2,200 kg.
What is the gross vehicle weight of the Genie TZ50?
2,200 kg.
Up to what speed is the Genie TZ50 approved?
Approved up to 100 km/h.
When was the Genie TZ50 built?
Production years: 2004–2020.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
