Fit Zel EURO 20-20
Built: 2020 · Series: Other models
More machines from model year 2020
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Fit-Zel – other models: the collective page of car-transport trailers from Rehau outside the named ranges, the Euro model line, unladen weights from 400 to 1,080 kg, gross weights from 1,750 to 4,500 kg
Fit-Zel is a manufacturer of car-transport trailers based in Rehau. This page gathers the versions the register could not assign to a named range, with type names such as DUO 35-20, EURO 20-20, EURO 35, EURO 45 and EURO TRANS, and the model RALLY 2010. The Euro line forms the base, split by trailing numbers into further versions, while DUO as a name refers to the number two.
Read on 3 more paragraphs
The register lists 8 versions with unladen weights from 400 to 1,080 kg, gross weights from 1,750 to 4,500 kg, lengths from 5,810 to 9,700 mm and widths from 2,010 to 2,550 mm.
Car-transport trailers of this kind are used by workshops, car dealers and private users to move vehicles, bring them to race tracks or tow away damaged cars; the wide span of gross weights from 1,750 to 4,500 kg covers both small single-car trailers and versions for heavier or multiple vehicles.
When buying used, the loading ramps and their mechanism, the lashing points and tie-down straps, the frame for rust and distortion along its full length, the axles and brake system, and the lighting and tyres are worth checking. On multi-axle versions, the synchronisation of the brakes between axles is worth checking too. On the largest versions around 9,700 mm, the distribution of load across the axles is worth an extra look. On the shorter versions around 5,810 mm, a single-axle tow vehicle with matching towing capacity is usually enough.
Sources: SpecCodex register, model data: Fit-Zel (weitere Modelle)
Technical data
Dimensions and weights
| Length | 5,810 mmcorrect |
|---|---|
| Width | 2,010 mmcorrect |
| Wheelbase | 4,000 mmcorrect |
| Unladen weight | 650 kgcorrect |
| Gross vehicle weight | 2,000 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Fit Zel EURO 20-20 weigh?
The unladen weight is 650 kg.
What is the gross vehicle weight of the Fit Zel EURO 20-20?
2,000 kg.
Up to what speed is the Fit Zel EURO 20-20 approved?
Approved up to 100 km/h.
What are the dimensions of the Fit Zel EURO 20-20?
5,810 mm × 2,010 mm.
When was the Fit Zel EURO 20-20 built?
Production years: 2020.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
