FB METALLVERARBEITUNG HP 2500
Built: 1993 · Series: Other models
More machines from model year 1993
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
FB Metallverarbeitung – other models: the collective page of trailers outside the named ranges, HP 1000 to HP 2500 and the P and V types, 330 to 1,890 kg unladen weight, 1,300 to 2,500 kg gross weight
This page gathers the trailers of the FB Metallverarbeitung brand that the register does not assign to its own range. The brand name points to a metalworking manufacturer whose programme comprises the HP series with the HP 1000, HP 1350 and HP 2500 types as well as the P 1.5, P 20 and V1200 types; on the HP types, the number in the designation follows the gross weight in kilograms, as the comparison with the register values shows.
Read on 3 more paragraphs
The register lists here 6 versions with unladen weights from 330 to 1,890 kg and gross weights from 1,300 to 2,500 kg at widths from 1,850 to 2,500 mm.
With gross weights up to 2,500 kg, the programme covers the full breadth of class O2, from light single-axle trailers for private use to sturdier versions for the commercial transport of machinery or building materials. The consistent type logic with the gross weight in the designation makes it easier to match the right size to the intended load.
Buying used, check the condition of the weld seams on the frame and attached parts, rust at loaded points such as the axle mount and drawbar, the function of the overrun brake and lighting, and the tyres and hitch. Parts for axles, brakes and lighting run through the general trailer parts trade; on the heavier types it is also worth checking the quality of the frame's galvanising or paint coating.
Sources: SpecCodex register, model data: FB Metallverarbeitung (weitere Modelle)
Technical data
Dimensions and weights
| Width | 2,200 mmcorrect |
|---|---|
| Wheelbase | 710 mmcorrect |
| Unladen weight | 550 kgcorrect |
| Gross vehicle weight | 2,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the FB METALLVERARBEITUNG HP 2500 weigh?
The unladen weight is 550 kg.
What is the gross vehicle weight of the FB METALLVERARBEITUNG HP 2500?
2,500 kg.
Up to what speed is the FB METALLVERARBEITUNG HP 2500 approved?
Approved up to 100 km/h.
When was the FB METALLVERARBEITUNG HP 2500 built?
Production years: 1993.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
