CRESCI RIMORCHI SRL R4001
Built: 2010 · Series: Other models
More machines from model year 2010
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Cresci Rimorchi Srl – other models: the collective page of trailers outside the named ranges of the Italian manufacturer, NAR 4001 and R4001, 330 to 410 kg unladen weight, 1,000 to 1,500 kg gross weight
This page gathers the Cresci Rimorchi Srl trailers the register could not assign to a named range. The company name carries in 'Rimorchi' the Italian word for trailers and in 'Srl' the Italian company form, marking the brand as an Italian trailer manufacturer. The types NAR 4001, NAR4001EST004B and R4001 share the digit sequence 4001; the further letter and digit codes themselves are not interpreted here.
Read on 3 more paragraphs
The register lists here 3 versions with unladen weights from 330 to 410 kg, gross weights from 1,000 to 1,500 kg, lengths from 6,100 to 6,750 mm and widths from 1,990 to 2,000 mm.
With unladen weights of only 330 to 410 kilograms at lengths over six metres, these are very light, elongated builds, of the kind designed for carrying boats or other long but light cargo. The generous gap to the gross weight of up to 1,500 kilograms leaves correspondingly ample room for the actual load.
On a used example of such a long, light trailer, the condition and alignment of the frame over its full length matters most, along with axle and wheel-bearing condition, the function of the overrun brake and its linkage, and rust on frame and drawbar. On boat trailers, the condition of the keel roller and cradles and corrosion from water contact as well. Parts for an Italian manufacturer of this size usually come through independent trailer workshops.
Sources: SpecCodex register, model data: Cresci Rimorchi Srl (weitere Modelle)
Technical data
Dimensions and weights
| Length | 6,750 mmcorrect |
|---|---|
| Width | 1,990 mmcorrect |
| Wheelbase | 5,070 mmcorrect |
| Unladen weight | 410 kgcorrect |
| Gross vehicle weight | 1,500 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the CRESCI RIMORCHI SRL R4001 weigh?
The unladen weight is 410 kg.
What is the gross vehicle weight of the CRESCI RIMORCHI SRL R4001?
1,500 kg.
Up to what speed is the CRESCI RIMORCHI SRL R4001 approved?
Approved up to 100 km/h.
What are the dimensions of the CRESCI RIMORCHI SRL R4001?
6,750 mm × 1,990 mm.
When was the CRESCI RIMORCHI SRL R4001 built?
Production years: 2010.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
