BREDEL MS-35G.1.
Built: 1988 · Series: Other models
More machines from model year 1988
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Bredel – other models: the collective page of trailers outside the named ranges, the MS range from MS 10 to MS 42 plus SP and V types, 1,040 to 2,900 kg unladen weight, 1.2 to 3.2 t gross weight
This page gathers the Bredel trailers the register could not assign to a named range. The largest part of the models is the MS range in the sizes 10, 15, 20, 25, 35, 40 and 42 with the suffixes N, K, L, A, G1, GD or AC marking equipment variants; alongside them stand the SP and V types (SP 50, VI 40, VN 50, VP 2.40, VS 40 and VS 50). One model additionally carries the brand name directly on the type plate (Bredel MS 35), and a further entry, Speciespuit MS15, combines an application name with the MS15 size code in a single model name.
Read on 3 more paragraphs
The register lists here 45 versions with unladen weights from 1,040 to 2,900 kg, gross weights from 1,200 to 3,200 kg and widths from 1,550 to 2,340 mm.
With a comparatively small gap between unladen and gross weight, these trailers are built for fixed, sturdy bodies rather than maximum load, which is typical of tank trailers and versions with permanently mounted equipment. Trailers of this kind are used above all in agriculture and commercial applications, where a piece of equipment or a tank stays permanently attached to the chassis.
On a used example, the tightness and corrosion of the tank count on the tank versions, the axle, suspension and brakes on all models, the frame and fittings for corrosion, the tow eye and jockey wheel, and, on the G and GD variants, the condition of any pump or feed equipment.
Sources: SpecCodex register, model data: Bredel (weitere Modelle)
Technical data
Dimensions and weights
| Width | 1,880 mmcorrect |
|---|---|
| Unladen weight | 1,960 kgcorrect |
| Gross vehicle weight | 2,000 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the BREDEL MS-35G.1. weigh?
The unladen weight is 1,960 kg.
What is the gross vehicle weight of the BREDEL MS-35G.1.?
2,000 kg.
Up to what speed is the BREDEL MS-35G.1. approved?
Approved up to 100 km/h.
When was the BREDEL MS-35G.1. built?
Production years: 1988.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
