Bmi Trailers MTT43
Built: 2009 · Series: Other models
More machines from model year 2009
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
BMI Trailers – other models: tipping and ejector semi-trailers from BMI Trailers of Dungannon, Northern Ireland, EU class O4 gross weights of 36,000 to 41,000 kg, three-axle
This page gathers the semi-trailers of BMI Trailers from Dungannon, Northern Ireland, the register could not assign to a named range. The company, formed in 1999, specialises in tipping, ejector and walking-floor semi-trailers for bulk and waste transport; the three-axle semi-trailers listed here fall into EU vehicle class O4 for trailers over 10 t gross weight.
Read on 4 more paragraphs
The register lists here 3 versions with unladen weights from 13,500 to 15,130 kg, gross weights from 36,000 to 41,000 kg, lengths from 12,950 to 13,600 mm and widths from 2,500 to 2,550 mm.
Tipping and ejector semi-trailers of this weight class have to carry air brakes; the tow vehicle required is a tractor unit with licence category CE. On tipping semi-trailers, the centre of gravity shifts sharply backwards and upwards as the body is raised, which is why level, load-bearing ground matters more when tipping than on semi-trailers with a fixed deck.
Tipping and ejector semi-trailers of this weight class carry bulk material, construction waste and rubbish and run behind tractor units in British and Irish waste and building-material haulage; walking-floor technology pushes the load out over a moving floor instead of a tipping body. The versions listed on this page show the range in which the maker operates outside its named model ranges.
On used semi-trailers, the condition of the walking floor or tipping body and their hydraulics, the braking system and axles, rust on the frame and underrun guard and the fifth-wheel coupling count; parts run through BMI Trailers in Dungannon.
Sources: SpecCodex register, model data: BMI Trailers (weitere Modelle)
Technical data
Dimensions and weights
| Length | 12,950 mmcorrect |
|---|---|
| Width | 2,500 mmcorrect |
| Wheelbase | 9,800 mmcorrect |
| Unladen weight | 15,130 kgcorrect |
| Gross vehicle weight | 36,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Bmi Trailers MTT43 weigh?
The unladen weight is 15,130 kg.
What is the gross vehicle weight of the Bmi Trailers MTT43?
36,000 kg.
Up to what speed is the Bmi Trailers MTT43 approved?
Approved up to 100 km/h.
What are the dimensions of the Bmi Trailers MTT43?
12,950 mm × 2,500 mm.
When was the Bmi Trailers MTT43 built?
Production years: 2009.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
