BETANCO 300 V 1500 KG
Built: 1980 · Series: Other models
More machines from model year 1980
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Betanco – other models: the collective page of trailers outside the named ranges, from 250 VT and 300 VT to 350 SW and BAA-2000, 402 to 840 kg unladen weight, 1,500 to 2,000 kg gross weight
This page gathers the Betanco trailers the register could not assign to a named range. The designations 2003, 250 VT, 300 V 1500 KG, 300 VT, 350 SW and BAA-2000 stand side by side, some with the gross weight stated directly in the name as with 300 V 1500 KG, without a consistent type logic across the whole programme, typical of small trailer makers building to individual customer orders. As with many small trailer brands, the programme is drawn from registration data, in which each model is listed individually with its technical values.
Read on 3 more paragraphs
The register lists here 6 versions with unladen weights from 402 to 840 kg, gross weights from 1,500 to 2,000 kg and widths from 1,770 to 2,060 mm.
With gross weights from 1.5 to 2 tonnes, all versions fall into the braked trailer class O2, as towed behind vans and stronger cars for transport and workshop tasks; the spread of unladen weights from about 400 to 840 kg points to different body variants within the range.
On a used example, axle and wheel-bearing condition, the function of the overrun brake and its linkage, rust on frame and drawbar, the state of lighting and plug, and tyres and rims all count; on the heavier versions the condition of the load bed and any side walls matters too. Spare parts usually run through independent trailer workshops.
Sources: SpecCodex register, model data: Betanco (weitere Modelle)
Technical data
Dimensions and weights
| Width | 1,820 mmcorrect |
|---|---|
| Wheelbase | 740 mmcorrect |
| Unladen weight | 510 kgcorrect |
| Gross vehicle weight | 1,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the BETANCO 300 V 1500 KG weigh?
The unladen weight is 510 kg.
What is the gross vehicle weight of the BETANCO 300 V 1500 KG?
1,500 kg.
Up to what speed is the BETANCO 300 V 1500 KG approved?
Approved up to 100 km/h.
When was the BETANCO 300 V 1500 KG built?
Production years: 1980.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
