Atlas T 112 A
Built: 1980 · Series: Other models
More machines from model year 1980
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Atlas – other models: a collector page for the portable compressors from construction-equipment maker Atlas Copco, 42 versions in the XAS and MS series, unladen weight 230 to 5,700 kg
This page gathers Atlas models the register could not assign to a named series. Model names such as XAS 45, XAS 65, XAS 85 D and MS 130 belong to Atlas Copco's portable site compressors; XAS denotes the diesel-driven series, with the number giving an approximate delivery rate in cubic feet per minute. The units are mounted on single-axle trailer chassis and towed to site behind a car or van.
Read on 3 more paragraphs
The register lists 42 versions with unladen weights from 230 to 5,700 kg and gross weights from 850 to 5,700 kg. Widths range from 1,300 to 2,480 mm.
Portable compressors of this kind supply construction sites with compressed air for breakers, sandblasting equipment and drilling tools; in the largest versions the unladen weight already matches the gross weight, since almost no extra payload is allowed for. Atlas Copco competes in this segment with Kaeser, Doosan Portable Power and Sullair. Mid-range compressors are also common with municipal works departments for sewer flushing and groundwork.
When buying used, check the diesel engine's running hours, the condition of the compressor block and oil cooling, the tightness of the compressed-air hoses, and the chassis drawbar and brakes; parts and service run through the Atlas Copco dealer network. Corroded air outlet couplings are a common wear point on yard-stored units.
Sources: SpecCodex register, model data: Atlas (weitere Modelle), Atlas Copco
Technical data
Dimensions and weights
| Width | 2,130 mmcorrect |
|---|---|
| Unladen weight | 450 kgcorrect |
| Gross vehicle weight | 1,600 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Atlas T 112 A weigh?
The unladen weight is 450 kg.
What is the gross vehicle weight of the Atlas T 112 A?
1,600 kg.
Up to what speed is the Atlas T 112 A approved?
Approved up to 100 km/h.
When was the Atlas T 112 A built?
Production years: 1980.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
