Allied Vehicles FORD INDEPENDENCE RE
Built: 2019-2025 · Series: Other models
More machines from model year 2019
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Allied Vehicles – other models: the collective page of wheelchair-accessible Ford conversions outside the named Independence and Vista ranges, 1,498 to 1,997 cm³ displacement, 1,458 to 2,555 kg unladen weight
Allied Vehicles is a Scottish converter based in Glasgow that adapts series-production vehicles, chiefly Fords, into wheelchair-accessible vehicles for taxi and private use; model names such as Independence and Vista denote the respective conversion packages with a lowered floor and rear ramp for wheelchair access. This page gathers the Allied Vehicles types the register could not assign to a named range.
Read on 3 more paragraphs
The register lists here 6 versions with displacements from 1,498 to 1,997 cm³, all four-cylinder, unladen weights from 1,458 to 2,555 kg, gross weights from 2,350 to 3,240 kg, lengths from 4,850 to 5,540 mm and widths from 1,850 to 2,090 mm.
Wheelchair-accessible conversions are especially widespread in Britain's taxi trade, where many councils require accessible vehicles; Allied Vehicles ranks here, alongside competitors such as Jubilee and BraunAbility, among the established converters built on common Ford models. Many local authorities specify such vehicles for school transport and non-emergency patient transport as well.
On these conversions, the condition and function of the ramp, tie-down points and lowered floor, corrosion in the reworked body areas, and the standard parts of the respective Ford donor vehicle all matter; parts for the conversion hardware run through Allied Vehicles itself, and for the vehicle base through the Ford network.
Sources: SpecCodex register, model data: Allied Vehicles (weitere Modelle), Allied Vehicles
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 1,995 cm³correct |
Dimensions and weights
| Length | 5,490 mmcorrect |
|---|---|
| Width | 2,090 mmcorrect |
| Wheelbase | 3,300 mmcorrect |
| Unladen weight | 2,555 kgcorrect |
| Gross vehicle weight | 3,240 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 180 km/hcorrect |
Frequently asked questions
How much does the Allied Vehicles FORD INDEPENDENCE RE weigh?
The unladen weight is 2,555 kg.
What is the gross vehicle weight of the Allied Vehicles FORD INDEPENDENCE RE?
3,240 kg.
What engine does the Allied Vehicles FORD INDEPENDENCE RE have?
4 cylinders, 1,995 cm³ displacement.
What are the dimensions of the Allied Vehicles FORD INDEPENDENCE RE?
5,490 mm × 2,090 mm.
When was the Allied Vehicles FORD INDEPENDENCE RE built?
Production years: 2019-2025.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
