Beco 2+1 SAN
Built: 2022 · Series: Other models
More machines from model year 2022
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Beco – further models: the collective page for trailers outside the named series, 2+1 SAN, 2+2 SAN Schamelaanhanger and BTA-500, 6,380 to 9,760 kg unladen weight, 28,000 to 45,000 kg gross weight
This page collects the Beco trailers that the register does not assign to any named series. Beco is a Dutch manufacturer based in Vriezenveen that builds, among other things, tipping and agricultural trailers; the types listed here, 2+1 SAN, 2+2 SAN BECO SCHAMELAANHANGER and BTA-500, come from Dutch registration data in which each model is listed individually with its technical values.
Read on 3 more paragraphs
The register lists 3 versions here with unladen weights from 6,380 to 9,760 kg, gross weights from 28,000 to 45,000 kg and widths from 2,540 to 2,550 mm; two of the three versions also have a length of 9,580 to 9,720 mm.
With gross weights of 28 to 45 tonnes against a comparatively low unladen weight, these versions belong to the heavy axle-trailer or module-carrier class used in heavy-goods haulage behind specialist tractor units and offering a large ratio of payload to unladen weight.
When buying used in this class, check in particular the condition of the axles and air suspension, the operation of the air braking system including ABS/EBS, cracks in the chassis and cross members, and corrosion on load-bearing parts. Spare parts for such heavy trailers usually come through specialist commercial-vehicle and semi-trailer workshops rather than a manufacturer network.
Sources: SpecCodex register, model data: Beco (weitere Modelle), Zulassungsdaten RDW (Niederlande)
Technical data
Dimensions and weights
| Width | 2,550 mmcorrect |
|---|---|
| Unladen weight | 6,380 kgcorrect |
| Gross vehicle weight | 28,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Beco 2+1 SAN weigh?
The unladen weight is 6,380 kg.
What is the gross vehicle weight of the Beco 2+1 SAN?
28,000 kg.
Up to what speed is the Beco 2+1 SAN approved?
Approved up to 100 km/h.
When was the Beco 2+1 SAN built?
Production years: 2022.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
