Technical register for agricultural, construction and commercial machinery · sourced data
Start › Military & special vehicles › Bae Systems Land Systems › Other models › Trojan armoured engineer vehicle

Bae Systems Land Systems Trojan armoured engineer vehicle

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Bae Systems Land Systems Trojan armoured engineer vehicle is a machine built by Bae Systems Land Systems. The engine delivers 1,200 hp (894.8 kW). The machine is 2,500 mm high. The unladen weight is 62,500 kg. Transmission: David Brown TN54ETS epicyclic transmission (6 fwd, 2 rev.). Rated output within this group ranges from 16 to 1,500 hp; the Trojan armoured engineer vehicle sits in the upper part of that range with 1,200 hp. Its immediate neighbours are the Puma armored engineering vehicle below it with 900 hp and the AEV 3 Kodiak above it with 1,500 hp. Rated output within this group ranges from 4 to 1,103 kW; here the Trojan armoured engineer vehicle sits in the upper part of that range with 894.8 kW. 3 Bae Systems Land Systems models across 2 series are on record.

BAE Systems Land Systems Trojan – armoured engineer vehicle on main battle tank chassis, with a Perkins CV12-8A diesel rated at 895 kW, a David Brown TN54ETS transmission and a weight of 62,500 kg

BAE Systems develops and builds armoured land systems, including the Trojan armoured engineer vehicle. The Trojan sits on a main battle tank chassis and accompanies armoured formations to clear or cross obstacles, minefields and ditches so that the protected fighting vehicles themselves do not have to stop for the task.

Read on 3 more paragraphs

The Trojan is powered by a Perkins CV12-8A V12 diesel engine rated at 895 kW. Power passes through a David Brown TN54ETS epicyclic transmission with six forward gears and two reverse gears. At a weight of 62,500 kg and a structural height of 2.5 m, the Trojan sits in the weight class of a main battle tank, matching its massive armour and the attached clearing and digging tools.

The Trojan belongs to armoured engineering equipment that opens a path through obstacles and minefields ahead of advancing main battle tanks. Civilian road vehicle classes, emissions stages and trailer classes do not apply to a tracked vehicle of this weight and purpose; it operates exclusively on military training grounds and in operational areas.

When buying a used Trojan, the condition of the tracks and road wheels matters given the vehicle's extreme weight of 62.5 tonnes, as does the function of the dozer-blade and digging-arm hydraulics, the condition of the epicyclic transmission together with oil analysis, and the running hours of the Perkins engine including its turbocharger and intercooler. Proof of demilitarisation and complete export and maintenance paperwork also matter, since such heavy engineer vehicles may only exist outside military use with the corresponding clearance.

Sources: SpecCodex-Register: Kennwerte des Modells Trojan armoured engineer vehicle, BAE Systems

Technical data

Engine

EnginePerkins CV12-8A Dieselcorrect
Power1,200 hp (894.8 kW)correct

Dimensions and weights

Width3,500 mmcorrect
Height2,500 mmcorrect
Unladen weight62,500 kgcorrect

Drivetrain and chassis

GearboxDavid Brown TN54ETS epicyclic transmission (6 fwd, 2 rev.)correct

Where this model stands

Power-to-weight ratio: 14.3 kW/t (895 kW / 62.5 t)

Stronger than 98% of the military & special vehicles in the register — out of 103 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Bae Systems Land Systems Trojan armoured engineer vehicle have?

The Bae Systems Land Systems Trojan armoured engineer vehicle delivers 1,200 hp.

How much does the Bae Systems Land Systems Trojan armoured engineer vehicle weigh?

The unladen weight is 62,500 kg.

What are the dimensions of the Bae Systems Land Systems Trojan armoured engineer vehicle?

3,500 mm × 2,500 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Wikipedia (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Fire appliance in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare