Autocar K-30 truck
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Autocar K-30 truck is a special-purpose vehicle made by Autocar. The engine produces 112 kW. The engine comes from Hercules RXC.
The gearbox is a 5 speed x 2 range trf. case unit.
It runs on 90 USgal L abbr=on. Within the range, rated power spans from 112 to 131 kW; with 112 kW, the K-30 truck sits at the bottom end. The next one up is the U8144T 5- to 6-ton 4×4 truck with 131 kW.
Technical data
Engine
| Engine | Hercules RXCcorrect |
|---|---|
| Fuel | 90 USgal Lcorrect |
| Power | 112 hp (83.5 kW)correct |
Drivetrain and chassis
| Gearbox | 5 speed x 2 range trf. casecorrect |
|---|
Frequently asked questions
How much power does the Autocar K-30 truck have?
The Autocar K-30 truck delivers 112 hp.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Wikipedia (retrieved August 2026) · How we check the data
Fire appliance in 3D section
Turn the model, look inside and click an assembly — each one is explained.
