Technical register for agricultural, construction and commercial machinery · sourced data
Start › Excavators & compaction › Allmand › TLB425 backhoe

Allmand TLB425 backhoe

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Allmand TLB425 backhoe is a machine built by Allmand. The engine delivers 25 hp (19 kW). The engine comes from Kubota. The engine is water-cooled. The model was built in USA. The fuel is diesel. Rated output across the Allmand range ranges from 20 to 37.5 hp; the TLB425 backhoe sits in the lower part of that range with 25 hp. Its immediate neighbours are the ABI TLB20-D backhoe below it with 20 hp and the 8330 above it with 26.5 hp. Rated output across the Allmand range ranges from 15 to 28 kW; here the TLB425 backhoe sits in the lower part of that range with 19 kW. 8 Allmand models across 3 series are on record.

Allmand excavators – other models: the ABI TLB backhoe loaders from Holdrege, Nebraska, Kubota and Robin/Kohler diesels, 15 to 19 kW, or 20 to 25 hp

This page gathers the Allmand backhoe loaders the register could not assign to a named range: the compact mini backhoe loaders ABI TLB20-D, TLB220 and TLB425. TLB stands in the construction-equipment industry for Tractor Loader Backhoe, a loader bucket at the front and a backhoe arm at the rear on a compact carrier. Allmand Bros., based in Holdrege, Nebraska, is known mainly for light towers and trench compactors and extended its range with these compact backhoe loaders under the ABI brand.

Read on 3 more paragraphs

The register lists here 3 versions with 15 to 19 kW, or 20 to 25 hp, with diesel engines from Kubota and from Robin/Kohler.

Compact backhoe loaders of this size are built for smaller building sites, landscaping and municipal works yards, where a full-size backhoe loader would be too big and too heavy but the combination of front bucket and rear backhoe is still wanted. Their advantage lies in the compact transport width, which lets the machines move on narrow access roads and in tight inner-city locations too.

On used examples, engine condition and cooling system, the tightness of the hydraulic cylinders on the loader and backhoe arm, wear on the tyres and stabilisers, and the condition of the bucket and teeth all matter; spare parts run through Allmand/ABI dealers and the engine makers Kubota and Kohler.

Sources: Kennwerte der Modelle Allmand Bagger (weitere Modelle), Allmand (Hersteller)

Technical data

Engine

Engine makeKubotacorrect
Fueldieselcorrect
Power25 hp (19 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Driveselectable four-wheel drivecorrect

Origin and approval

PlantUSAcorrect

Frequently asked questions

How much power does the Allmand TLB425 backhoe have?

The Allmand TLB425 backhoe delivers 25 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare