Alko MC 38XA
Built: 2003-2003 · Series: MC
More machines from model year 2003
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Alko MC – the register entry for AL-KO's MC range: four-cylinder diesel chassis of 2,500 to 2,800 cm³, gross weights of 3,500 to 4,500 kg, chassis and running-gear technology from Kötz in Bavaria
This collective page gathers AL-KO's MC range in the register. AL-KO Kober SE, headquartered in Kötz in the Bavarian district of Günzburg, is a diversified group whose vehicle-technology division supplies chassis, axles and running-gear components for trailers and light commercial vehicles to body builders across Europe. The MC versions recorded in the register show the four-cylinder diesel engines of around 2.5 to 2.8 litres typical of this vehicle class, and body weights in the range between 3.5 and 4.5 tonnes gross weight, as is usual for chassis carrying third-party bodies. The suffixes T and XTA in the type designation mark different equipment levels of the respective chassis.
Read on 3 more paragraphs
The register lists 5 versions with displacements from 2,500 to 2,800 cm³ from four-cylinder engines throughout, unladen weights from 2,980 to 3,660 kg and gross weights from 3,500 to 4,500 kg; lengths range from 6,460 to 7,700 mm, widths from 2,220 to 2,320 mm.
As a supplier of chassis and running-gear technology, AL-KO serves numerous body builders in this weight segment, and depending on registration practice appears itself as the manufacturer in the vehicle register, while the drivetrain still comes from the respective base-vehicle maker.
On a used MC-range vehicle, the corrosion protection of the galvanised chassis frame, the condition of the suspension and axle bearings, the mileage and service history of the four-cylinder diesel engine, and the electrical connections between chassis and body all count; running-gear parts run through AL-KO, engine-specific parts through the respective base-vehicle maker.
Sources: Kennwerte der Modelle Alko MC, AL-KO Kober SE (Hersteller)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 2,800 cm³correct |
Dimensions and weights
| Length | 6,460 mmcorrect |
|---|---|
| Width | 2,320 mmcorrect |
| Wheelbase | 3,850 mmcorrect |
| Unladen weight | 3,660 kgcorrect |
| Gross vehicle weight | 3,850 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|
Frequently asked questions
How much does the Alko MC 38XA weigh?
The unladen weight is 3,660 kg.
What is the gross vehicle weight of the Alko MC 38XA?
3,850 kg.
What engine does the Alko MC 38XA have?
4 cylinders, 2,800 cm³ displacement.
What are the dimensions of the Alko MC 38XA?
6,460 mm × 2,320 mm.
When was the Alko MC 38XA built?
Production years: 2003.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.