Agefa ASP 3500
Built: 2013 · Series: Other models
More machines from model year 2013
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Agefa ASP 3500 – EU category O2 flatbed trailer built in 2013: 3,500 kg gross weight, 985 kg unladen weight, 7,000 mm length, 2,250 mm width
In the model designation ASP 3500, the number repeats the gross weight of 3,500 kg, a naming pattern common among smaller trailer makers; at that weight the trailer falls into EU category O2.
Read on 3 more paragraphs
Gross weight stands at 3,500 kg and unladen weight at 985 kg, giving a payload of 2,515 kg, around 72 per cent of the gross weight. At a length of 7,000 mm and a width of 2,250 mm, this ratio results in a lightly built trailer with a comparatively large deck, of the kind needed for general cargo, furniture or building materials.
Trailers of this weight class are accordingly fitted with an overrun brake rather than an air system as a rule. Towing it behind a car needs licence category B or BE depending on the combination's gross weight; at full load the tow vehicle's permitted nose weight on the towball should also be observed.
On a used trailer of this kind, what counts is the condition of the axle and wheel bearings, the function of the overrun brake and its linkage, rust on the frame and deck, and the tyres, lighting and electrical plug. Given such a large deck on a light frame, it is also worth checking for sagging in the floor boards and the frame's longitudinal members. Given the trailer's age, the wiring loom for the lights is worth a look too, since original cabling from 2013 is a common failure point on trailers of this size.
Sources: SpecCodex-Register: Kennwerte des Modells Agefa ASP 3500
Technical data
Dimensions and weights
| Length | 7,000 mmcorrect |
|---|---|
| Width | 2,250 mmcorrect |
| Unladen weight | 985 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Frequently asked questions
How much does the Agefa ASP 3500 weigh?
The unladen weight is 985 kg.
What is the gross vehicle weight of the Agefa ASP 3500?
3,500 kg.
What are the dimensions of the Agefa ASP 3500?
7,000 mm × 2,250 mm.
When was the Agefa ASP 3500 built?
Production years: 2013.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
